|
|
|
Air Compressors
|
DELTA® 12 GALLON 135PSI AIR COMPRESSOR KIT
|
| 12 Gallon 135 Psi Air Compressor K
|
THE DELTA® SHOPMASTER™ CP503 12 GALLON AIR COMPRESSOR KIT FEATURES AN OIL FREE DESIGN FOR DURABILITY AND LOW MAINTENANCE:
3HP (1-1/2HP RUNNING), 120VAC, 15A MOTOR. 135PSI MAXIMUM PRESSURE; 4.9@40/3.5@90 AIR DELIVERY. BUILT-IN AUTOMATIC THERMAL OVERLOAD PROTECTION - TWO GAUGES AND REGULATORS. INCLUDES 25' AIR HOSE, 1/2" IMPACT WRENCH, SUCTION FEED SPRAY GUN, 3/8" RATCHET WRENCH, BLOW GUN, INFLATION KIT, 8 PIECE SOCKET SET WITH ADAPTER, TOOL OIL, TEFLON® TAPE, HEX WRENCH, COUPLER, 4 MALE FITTINGS, FEMALE FITTING AND CARRYING CASE. WEIGHS 77 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Bits Drill And Boring - Specialty
|
DELTA® HOLLOW CHISEL MORTISER INCLUDES CHISELS AND BITS
|
| 1/4" Mortise Chisel & Bit
...plus other(s)
|
HEAVY, CAST IRON AND STEEL FOR RIGIDITY AND STABILITY, THE DELTA® INDUSTRIAL MODEL 14-651 DELUXE MORTISER COMES WITH 1/4", 5/16", 3/8" AND 1/2" DELTA® CHISELS AND BITS:
120VAC, 1/2 HP, 4.8A, 1PH, 1,750 RPM INDUCTION MOTOR - 3/8" CHUCK WITH KEY. 5" MAXIMUM STROKE; UNIQUE, GAS-FILLED HEAD STABILIZER. 9-3/8" UNDER HEAD TO BASE, 3-3/4" UNDER HOLDDOWN. INCLUDED RISER BLOCK ADDS 1-3/4" CAPACITY UNDER HEAD. EASY, OPEN ACCESS TO DRILL CHUCK FOR BIT CHANGING. 12-1/4" X 8-1/4" CAST IRON TABLE WITH THROUGH HOLE; 16-1/4" X 13-1/2" BASE. RACK & PINION ADJUSTABLE 2-15/16" X 5-13/16" FENCE (EACH SIDE), 13-5/8" OVERALL. MORTISING HEAD CAN TURN 180° FOR OFF TABLE MORTISING. MULTI-POSITION FEED LEVER. PRE-DRILLED BASE FOR BENCH MOUNTING. TOOL AND CHISEL TRAY AND INSTRUCTION MANUAL INCLUDED. 30"H X 13-1/2"W X 16-1/4"D OVERALL. NET WEIGHT 55 LBS.; 77 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
REPLACEMENT MORTISE CHISELS HAVE 5/8" CHISEL SHANKS: 17-908 - 1/4" MORTISE, 1-7/8" CUT DEPTH; 4-1/4"L CHISEL, 6-1/8"L BIT. 17-909 - 5/16" MORTISE, 1-7/8" CUT DEPTH; 4-1/4"L CHISEL, 6-1/8"L BIT. 17-910 - 3/8" MORTISE, 3" CUT DEPTH; 5-1/2"L CHISEL, 7-1/8"L BIT. 17-911 - 1/2" MORTISE, 3" CUT DEPTH; 5-1/2"L CHISEL, 7-1/8"L BIT.
|
|
|
|
Dust Collection - Air Filtration Systems
|
DELTA® FIXED AND PORTABLE AIR CLEANERS FILTER OUT POTENTIALLY HAZARDOUS DUST
|
| Ambient Air Cleaner
...plus other(s)
|
THE DELTA® MODEL 50-875 AMBIENT AIR CLEANER CAN HANG INCONSPICUOUSLY FROM THE CEILING OR BE BENCH MOUNTED, QUIETLY SCRUBBING THE AIR:
120V, 1/5HP, 1PH, 1,025 RPM MOTOR - 540, 730, 1,200 CFM OPERATION. REMOTE CONTROL FOR EASY OPERATION (REQUIRES 2 AAA BATTERIES, NOT INCLUDED). CAN BE SET TO RUN UP TO 7-1/2 HOURS (30 MINUTE INCREMENTS) THEN SHUT OFF, AUTOMATICALLY. FILTERS ARE EASY TO CHANGE WITHOUT TOOLS AND TRAP UP TO 91% OF 1 MICRON PARTICLES. INCLUDES FILTERS, PATENTED DIRTY FILTER INDICATOR, HANGING HOOKS, POWER CORDS, MOUNTING HARDWARE AND INSTRUCTIONS.
EASY GRIP HANDLES MAKE MOVING THE DELTA® SHOPMASTER™ MODEL AP-200 PORTABLE AIR CLEANER QUICK AND EASY:
120VAC, 1/8HP, 1PH, 1,050 RPM MOTOR; 850 CFM (1 MICRON FILTRATION). FILTER SYSTEM INCLUDES DISPOSABLE PLEATED OUTER FILTER AND THREE POCKET INNER FILTER. NO TOOLS REQUIRED FOR FILTER REPLACEMENT. DURABLE, POWDER COATED, ALL STEEL CONSTRUCTION. INCLUDES FOUR EYE BOLTS AND FLANGE NUTS FOR SUSPENDING FROM CEILING (CHAINS NOT INCLUDED), FOUR NON-MARRING RUBBER FEET, 6'L POWER CORD WITH ON/OFF ROCKER SWITCH AND INSTRUCTIONS.
EACH IS 12"H X 24"W X 30"L. 50 LBS. NET WEIGHT; 62 LBS. SHIPPING WEIGHT. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Air Filtration Systems
|
DELTA® AMBIENT AIR CLEANER WITH WORKLIGHT...BREATHE EASIER, SEE BETTER
|
| Ambient Air Purifier W/work Light
|
THE REMOVAL OF WOOD DUST PARTICLES FROM THE AIR HAS BECOME A MAJOR CONCERN FOR MANY SHOP OWNERS AND USERS. WITH THE DELTA® SHOPMASTER™ MODEL AP-100 YOU CAN LOCATE AN AMBIENT AIR CLEANER DIRECTLY OVER YOUR WORKSPACE, WHERE IT WILL BE MORE EFFICIENT, AND PROVIDE BETTER LIGHTING, AS WELL:
FILTER SYSTEM INCLUDES TWO BLACK, OPEN-CELL FILTERS AND TWO 5 MICRON INNER BAG FILTERS. 120VAC MOTOR - 400 CFM WITH FILTERS, 450 CFM WITHOUT. LIGHT PROVIDED BY TWO 1" X 18" WHITE FLOURESCENT BULBS (BULBS NOT INCLUDED). INCLUDES EYE BOLTS AND FLANGE NUTS FOR SUSPENDING FROM CEILING (CHAIN NOT INCLUDED), ON/OFF PULL CORDS FOR LAMP AND FAN, 6'L GROUNDED POWER CORD WITH IN-LINE ON/OFF SWITCH, EASY-GRIP HANDLE FOR PORTABILITY AND INSTRUCTIONS. 20-1/2"H X 23"W X 23"D. WEIGHS 40 LBS. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Air Filtration Systems
|
TAKE THIS DELTA® PORTABLE AIR CLEANER WHERE AND WHEN IT'S NEEDED
|
| Ambient Air Cleaner, 850 Cfm
...plus other(s)
|
EASY GRIP HANDLES MAKE MOVING THE DELTA® SHOPMASTER™ MODEL AP-200 PORTABLE AIR CLEANER QUICK AND EASY:
120VAC, 1/8HP, 1PH, 1,050 RPM MOTOR; 850 CFM (1 MICRON FILTRATION). FILTER SYSTEM INCLUDES DISPOSABLE PLEATED OUTER FILTER AND THREE POCKET INNER FILTER. NO TOOLS REQUIRED FOR FILTER REPLACEMENT. DURABLE, POWDER COATED, ALL STEEL CONSTRUCTION. INCLUDES FOUR EYE BOLTS AND FLANGE NUTS FOR SUSPENDING FROM CEILING (CHAINS NOT INCLUDED), FOUR NON-MARRING RUBBER FEET, 6'L POWER CORD WITH ON/OFF ROCKER SWITCH AND INSTRUCTIONS. 12"H X 24"W X 30"L. WEIGHS 50 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Dust Collectors Common Brands
|
DELTA 1 HP DUST COLLECTOR IS AVAILABLE IN BAG OR CANISTER FILTER
|
| 1hp Dust Collector-bag Type
...plus other(s)
|
|
1HP TEFC MOTOR FOR LONG SERVICE LIFE IN DUST ENVIRONMENTS CHOOSE BAG FILTER (1 MICRON) OR CANISTER FILTER (2 MICRON) MODEL PLASTIC COLLECTION BAG TO FORCE RETURN AIR THROUGH FILTER STEEL IMPELLER WITH CURVED BLADES PRODUCES MAXIMUM AIR FLOW STURDY ENCLOSED BASE WITH 4 SWIVEL CASTERS 2 YEAR MANUFACTURER'S WARRANTY IMPORTED
|
|
|
|
Dust Collection - Dust Collectors Common Brands
|
NEW DELTA® INDUSTRIAL DUST COLLECTORS FILTER BETTER, ASSEMBLE EASIER
|
| Dust Collector 1-1/2hp 1200cfm
...plus other(s)
|
DELTA® INDUSTRIAL DUST COLLECTORS USE HIGHLY EFFICIENT 1 MICRON FILTER MATERIAL, SNAP IN BAG RINGS TO ELIMINATE LOCK STRAPS AND HOUSINGS THAT CAN BE MOUNTED WITH DUST PORT(S) FACING UP OR DOWN. STEEL BASES WITH 4 CASTERS INCLUDED:
50-760 - 1,200 CFM SINGLE BAG, 20.5 SQ. FT. FILTER W/2.4 CU. FT. CHIP CAPACITIES, TWO 4" AND ONE 5" MAIN DUST PORTS - 1-1/2 HP, 120/240VAC, 1PH, 83"H X 35"W X 19"D, WEIGHS 100 LBS. 50-761 - 2,100 CFM DOUBLE BAG, 41 SQ. FT. FILTER W/4.8 CU. FT. CHIP CAPACITIES, THREE 4" AND ONE 7" MAIN DUST PORTS - 2 HP, 230VAC, 1PH, 87"H X 57"W X 19"D, WEIGHS 132 LBS. 50-762 - 3,100 CFM DOUBLE BAG, 57.2 SQ. FT. FILTER W/7.6 CU. FT. CHIP CAPACITIES, FOUR 4" AND ONE 8" MAIN DUST PORTS - 3 HP, 230/460VAC, 3PH, 110"H X 66"W X 23"D, WEIGHS 186 LBS. 50-763 - SAME AS 50-762 BUT WITH 3 HP, 230VAC, 1PH MOTOR. 50-764 - 4,600 CFM DOUBLE BAG, 140.8 SQ. FT. FILTER W/12.4 CU. FT. CHIP CAPACITIES, FOUR 5" AND ONE 10" MAIN DUST PORTS - 5 HP, 230/460VAC, 3PH, 110"H X 75"W X 26"D, WEIGHS 260 LBS. 50-765 - SAME AS 50-764 BUT WITH 5 HP, 230VAC, 1PH MOTOR. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
Click for More Info
|
Dust Collection - Dust Collectors Common Brands
|
NEW DELTA® INDUSTRIAL DUST COLLECTORS FILTER BETTER, ASSEMBLE EASIER
|
| Dust Collector 3hp 3ph 3100cfm
...plus other(s)
|
DELTA® INDUSTRIAL DUST COLLECTORS USE HIGHLY EFFICIENT 1 MICRON FILTER MATERIAL, SNAP IN BAG RINGS TO ELIMINATE LOCK STRAPS AND HOUSINGS THAT CAN BE MOUNTED WITH DUST PORT(S) FACING UP OR DOWN. STEEL BASES WITH 4 CASTERS INCLUDED:
50-760 - 1,200 CFM SINGLE BAG, 20.5 SQ. FT. FILTER W/2.4 CU. FT. CHIP CAPACITIES, TWO 4" AND ONE 5" MAIN DUST PORTS - 1-1/2 HP, 120/240VAC, 1PH, 83"H X 35"W X 19"D, WEIGHS 100 LBS. 50-761 - 2,100 CFM DOUBLE BAG, 41 SQ. FT. FILTER W/4.8 CU. FT. CHIP CAPACITIES, THREE 4" AND ONE 7" MAIN DUST PORTS - 2 HP, 230VAC, 1PH, 87"H X 57"W X 19"D, WEIGHS 132 LBS. 50-762 - 3,100 CFM DOUBLE BAG, 57.2 SQ. FT. FILTER W/7.6 CU. FT. CHIP CAPACITIES, FOUR 4" AND ONE 8" MAIN DUST PORTS - 3 HP, 230/460VAC, 3PH, 110"H X 66"W X 23"D, WEIGHS 186 LBS. 50-763 - SAME AS 50-762 BUT WITH 3 HP, 230VAC, 1PH MOTOR. 50-764 - 4,600 CFM DOUBLE BAG, 140.8 SQ. FT. FILTER W/12.4 CU. FT. CHIP CAPACITIES, FOUR 5" AND ONE 10" MAIN DUST PORTS - 5 HP, 230/460VAC, 3PH, 110"H X 75"W X 26"D, WEIGHS 260 LBS. 50-765 - SAME AS 50-764 BUT WITH 5 HP, 230VAC, 1PH MOTOR. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Dust Collectors Common Brands
|
DELTA® CANISTER STYLE DUST COLLECTOR IS EFFICIENT AND EASY TO CLEAN
|
| 1-1/2hp Dust Collector W/canister
|
THE DELTA® INDUSTRIAL MODEL 50-850A CANISTER DUST COLLECTOR COMES WITH A POWERFUL INDUCTION MOTOR AND 2 MICRON CANISTER FILTER FOR CLEANER, HEALTHIER AIR:
1-1/2 HP, 120VAC, 1PH MOTOR. 1,200 CFM - 12.75 INCHES H20 MAXIMUM STATIC PRESSURE. 33.1 SQ. FT. FILTRATION SURFACE; 6.3 CU. FT. CHIP COLLECTION BAG CAPACITY - EASILY CLEANED BY TURNING ATTACHED HANDLE. INCLUDES TWO 6 MIL PLASTIC CHIP BAGS, SUPPORT DRUM, TWO 4" DIA. DUST PORTS, 6' HOSE, ONE INTAKE CAP, STEEL BASE, FOUR SWIVEL CASTERS, POWER CORD WITH PLUG PLUS AN INSTRUCTION MANUAL. . 88"H X 37"W X 27"D. NET WEIGHT 100 LBS. SHIPPING WEIGHT 120 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Not Listed Elsewhere
|
WHY DIDN'T ANYONE THINK OF THIS YEARS AGO?
|
| Less-mess Dust Collector
|
|
SIMPLE, EFFECTIVE IDEA FOR COLLECTING DUST FROM OPEN STAND TABLE SAWS. FITS ALL DELTA® CONTRACTOR AND MOST CRAFTSMAN TABLE SAWS WITH OPEN STANDS. VERY HEAVY DUTY CANVAS FEATURES HEAVY THREAD AND DOUBLE STITCHING. BAG ATTACHES TO SAW BASE WITH INCLUDED SNAPS. REQUIRES SIMPLE DRILLING TO INSTALL. TEMPLATE SHOWS WHERE TO DRILL. ONCE SNAPS ARE ATTACHED, JUST EMPTY BAG ONCE IN AWHILE. USA.
|
|
|
|
Dust Collection - Plastic Hose & Fittings
|
DELTA® SHOPMASTER™ PORTABLE DUST COLLECTOR GOES TO WHERE THE DUST IS
|
| 4" Dust Connector Kit
...plus other(s)
|
STOP THE DUST AT A VARIETY OF SOURCES USING A DELTA® SHOPMASTER™ AP-300 PORTABLE DUST COLLECTOR:
110/240V, 3/4HP MOTOR PRODUCES 550 CFM AT 3,450 RPM. STEEL IMPELLER IS BALANCED AND CURVED FOR OPTIMUM AIR MOVEMENT AND WEAR PROTECTION. 21"W X 38"L X 38"H. NET WEIGHT 39 LBS.; SHIPPING WEIGHT 50 LBS. INCLUDES 4" X 10' HOSE WITH 9-1/2" X 5-1/2" METAL DUST HOOD, 30 MICRON DUST COLLECTION BAG, ANGLED SUPPORT TUBE, ADJUSTABLE SUPPORT ARM, CLAMPS, HARDWARE AND COMPLETE INSTRUCTIONS. OPTIONAL AP-050 4" ACCESSORY KIT COMES WITH 4" DIA. X 20' LONG HOSE, 3 ELBOWS, 2 "T" CONNECTORS, 8 QUICK CONNECT CONNECTORS, 4 BLAST GATES, TWO 4" HOSE-TO-HOSE CONNECTORS, 12 WALL CLAMPS, 14 HOSE CLAMPS PLUS HARDWARE PACKS FOR WALL CLAMPS, SCREWS AND ANCHORS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Hand Tools - Turning
|
DELTA® MICRO WOODTURNING TOOL SET - FIVE DIFFERENT SHAPES
|
| Set Of 5 Micro Turning Tools
|
IDEAL FOR SMALL OR DETAIL WORK, THE DELTA® 46-671 5-PIECE MICRO WOODTURNING TOOL SET COMES WITH A 1/4" ROUGHING OUT GOUGE, 1/8" SPINDLE GOUGE; 1/4" ROUND NOSE SCRAPER; 1/4" SKEW CHISEL AND 1/16" PARTING TOOL - EACH TOOL IS ONLY 10" LONG OVERALL:
HIGH-GRADE, STEEL ALLOY BLADES - PRECISION-GROUND CUTTING EDGES PROVIDE CLEANER, SMOOTHER TURNING. HARDWOOD HANDLES FOR BETTER CONTROL. METAL FERRULES FOR LONGER TOOL LIFE. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
THE ONE LID STAY THAT IS CONVERTIBLE, REVERSIBLE, ADJUSTABLE AND DEMOUNTABLE
|
| Convertible Lid Stay
|
STRONG, DIE CAST NICKEL PLATED DELTA CONVERTIBLE LID STAYS STOP THE LID AT INTERMEDIATE POSITIONS AND ALLOW YOU TO PRECISELY ADJUST THE BRAKING POWER:
8"L STAY SUPPORTS LIDS UP TO 20 LBS. ALL HOLES FIT 32MM CENTERS AND CAN BE PLACED 27MM OR 32MM FROM THE EDGE. SIMPLY FASTEN THE BRACKETS TO THE CABINET, THEN SNAP THE SUPPORT INTO PLACE. TENSION CAN BE REVERSED TO SUIT LIFT-UP OR DROP-DOWN FUNCTIONS. OPENING ANGLE ADJUSTS FROM 75° TO 90° BY BRACKET RELOCATION. INSTRUCTIONS INCLUDED (MOUNTING SCREWS NOT INCLUDED).
|
|
|
|
Hardware Drawer Slides - Not Listed Elsewhere
|
DELTA CONCEALED DRAWER SLIDES "HIDE" WITH THE DRAWER OPEN
|
| Csm-2000-12" Drwr Slde Ply
...plus other(s)
|
RATED AT 100 LBS., SIDE MOUNTED DELTA CSM 2000 DRAWER SLIDES UTILIZE A CANTILEVER SUSPENSION SYSTEM TO KEEP THE HARDWARE CONCEALED:
BUILT-IN RIGHT ANGLE FLANGES FOR FAST FITTING WITH NO MEASURING - HEAVY GAUGE STEEL CONSTRUCTION. BUILT-IN ADJUSTMENTS ELIMINATE SIDE PLAY (1/2" SIDE CLEARANCE REQUIRED). SELF-CLOSING FEATURE KEEPS DRAWERS FROM REMAINING SLIGHTLY OPEN. BLACK EPOXY COATING (MOUNTING SCREWS AND INSTRUCTIONS INCLUDED). NOTE: SIZES LONGER THAN 18" REQUIRE 1-5/8" BEHIND THE DRAWER. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Drawer Slides - Not Listed Elsewhere
|
DELTA ST750 INVISIBLE DRAWER SLIDES
|
| 12" Invisible Side Mount Drawer Slide
...plus other(s)
|
RATED AT 75 LBS., DELTA ST750 INVISIBLE DRAWER SLIDES HAVE FEATURES THAT SPEED INSTALLATION WHILE PROVIDING SMOOTH, TROUBLE FREE OPERATION - CAN BE MOUNTED USING THE 32MM SYSTEM:
CORNER ROLLERS ARE NON-HANDED AND SELF-ALIGNING. POSITIVE OUT STOP AND HOLD OPEN FEATURE - ZINC PLATED (MOUNTING SCREWS INCLUDED). OPTIONAL ADJUSTMENT FIXTURE ALLOWS VERTICAL ALIGNMENT WITHOUT REMOVAL OF DRAWER. OPTIONAL ADJUSTABLE REAR BRACKET LETS YOU SQUARE DRAWER FRONT WITH FACE FRAME, INSTANTLY. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Drawer Slides - Roller Box Drawer
|
UNIQUE DELTA DRAWER SLIDE HANDLES 50 POUND LOADS
|
| Delta 100 Drawer Slide
...plus other(s)
|
EASY AND FAST INSTALLATION MAKES THESE UNIQUE DELTA DG100 DRAWER SLIDES THE CHOICE FOR NEW CONSTRUCTION OR RETROFITTING:
DISC ROLLERS PROVIDE SMOOTH AND EASY MOVEMENT; POSITIVE STOP AND RELEASE LEVER FOR EASY DRAWER REMOVAL. 22-1/2" METAL TRACK CAN BE TRIMMED TO LENGTH. COMPLETE PACKAGE INCLUDES 20 GA. PAINTED STEEL TRACK, PLASTIC WING TO ATTACH TO DRAWER, ADJUSTABLE REAR MOUNTING BRACKET, TWO DISC ROLLERS, MOUNTING SCREWS AND COMPLETE INSTRUCTIONS. USA.
|
|
|
|
Hardware Drawer Slides - Roller Box Drawer
|
DELTA ST750 INVISIBLE DRAWER SLIDES - BULK QUANTITIES, LOW PRICES
|
| 10 Pr Bx 14" Invisible Slide
...plus other(s)
|
WITH THESE 14" AND 20" DELTA DRAWER SLIDES ROLLERS MOUNT TO THE REAR OF THE DRAWER BOX SO NO HARDWARE IS EXPOSED ON THE DRAWER SIDES:
1/2" ± 1/32" SIDE CLEARANCE REQUIRED. EXCEED BIFMA, KCMA AND BHMA 50 LB. CLASS STANDARDS. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Home Improvement - Automotive
|
SMITH & WESSON® FLASHLIGHTS - BRIGHT, DEPENDABLE AND RUGGED
|
| Delta Force Tactical Flashlight
...plus other(s)
|
SW300TWT GALAXY™ 3 LED FLASHLIGHT IS EXCEPTIONALLY LIGHTWEIGHT (4 OZ.) AND DURABLE: ULTRA-BRIGHT WHITE LEDS OFFER FULL SPECTRUM COLOR FOR TRUE LIGHT AND LAST OVER 10 YEARS. SHATTERPROOF LED DIODES LAST OVER 110,000 HOURS AND HAVE UP TO 30 HOURS OF CONTINUOUS BATTERY LIFE. SMALL LIGHTWEIGHT CONSTRUCTION MAKES IT PERFECT FOR POCKETS, PURSES, BACKPACKS AND MORE. INCLUDES 2 AA BATTERIES. 1" DIA. X 6" LONG - TITANIUM CASE (COLOR). SW320XWT 3XGALAXY 2 IN 1 FLASHLIGHT (NOT SHOWN) COMBINES AN ULTRA-BRIGHT XENON BULB WITH THE ENERGY SAVING EFFICIENCY OF 3 WHITE LEDS: PUSH BUTTON SWITCH FOR LED MODE. STOPLIGHT™ LOCK-OUT TAIL CAP FOR XENON MODE. KNURLED GRIP FOR SECURITY. CONSTRUCTED USING PRECISION MACHINED ANODIZED ALUMINUM FOR SUPERIOR CORROSION RESISTANCE. KNURLED GRIP FOR SECURITY. COMES WITH DELUXE NYLON HOLSTER, SPARE XENON BULB AND 2 AA BATTERIES. 1-1/2" DIA. X 7" LONG; WEIGHS 6-1/2 OZ. - BLACK CASE. SW750LH GALAXY™ LUXEON 1W LED HEAD LIGHT COMBINES STATE OF THE ART 30 LUMEN LUXEON™ BULB BRIGHTNESS AND RANGE WITH LED EFFICIENCY: 6 CONTINUOUS HOURS OF OPERATION WITH NEW BATTERIES - OVER 100,000 HOURS OF BULB LIFE. FIRE, WATER, CORROSION, SHATTER, SCRATCH AND IMPACT RESISTANT. INCLUDES ADJUSTABLE HEAD STRAP FOR SECURE, COMFORTABLE FIT. REQUIRES 3 AAA BATTERIES (NOT INCLUDED). 1-3/4" DIA. X 2-1/2" LONG; WEIGHS 4.9 OZ. - BLACK CASE. SW422CBO CLASSIC COMBO INCLUDES A COMPACT FLASHLIGHT WITH ULTRA BRIGHT XENON BULB PLUS A DUAL LOCK-BACK KNIFE: XENON BULB PROVIDES POWERFUL WHITE LIGHT 200% BRIGHTER THAN STANDARD BULBS - ADJUSTABLE BEAM GIVES USER GREATER CONTROL AND PRECISION. ANODIZED AEROSPACE ALUMINUM BODY HAS A KNURLED FINISH FOR EASY GRIPPING. SPARE BULB AND 2 AA BATTERIES INCLUDED. 1" DIA. X 6-1/4" LONG; WEIGHS 4 OZ. - BLACK CASE KNIFE FEATURES TWO DURABLE 3" LONG STAINLESS STEEL LOCKING BLADES - ONE IS A RAZOR SHARP STRAIGHT EDGE FOR GENERAL USE; THE SECOND IS SERRATED FOR MORE DIFFICULT CUTTING. THUMB SCREW FOR EASY ONE HANDED OPENING - BELT CLIP INCLUDED. SW720LX GALAXY™ 1W LUXEON LED FLASHLIGHT IS MOST NOTABLE FOR ITS EXCEPTIONAL BRIGHTNESS. THE HIGH-FLUX LUXEON™ BULB PROVIDES THE LONG LASTING LIFE OF AN LED BUT IS 10 TIMES BRIGHTER THAN A STANDARD LED: PRECISION MACHINED ANODIZED ALUMINUM WITH KNURLED GRIP AND PROTECTIVE NOTCHES TO ENSURE NO SLIPPING OR ROLLING. FIRE, WATER, CORROSION, SHATTER, SCRATCH AND IMPACT RESISTANT. DELUXE HOLSTER, LANYARD AND 2 AA BATTERIES INCLUDED. 1-1/4" DIA. X 6-1/2" LONG; WEIGHS 3.5 OZ. - BLACK CASE. SW900XWT 9XGALAXY 2 IN 1 FLASHLIGHT IS THE ULTIMATE COMBINATION OF POWER AND VERSATILITY: FLASHLIGHT COMBINES AN ULTRA BRIGHT XENON BULB (66 LUMENS) WITH THE POWER AND ENERGY SAVING EFFICIENCY OF A 9 WHITE LED FLASHLIGHT. TWIN SWITCH TECHNOLOGY FOR FAST, EASY SELECTION BETWEEN MODES. ANTI-ROLL BAR AND WATER RESISTANT BODY ENSURE MAXIMUM SAFETY IN THE WORKPLACE. COMES WITH DELUXE HOLSTER, SPARE BULB AND TWO LITHIUM (3V) BATTERIES. 1-1/2" DIA. X 7" LONG; WEIGHS 6.5 OZ. - BLACK CASE. SW700XT DELTA FORCE TACTICAL FLASHLIGHT (NOT SHOWN) PRODUCES 93 LUMENS OF BRILLIANT WHITE LIGHT FROM A POWERFUL XENON BULB INSIDE A HIGH DENSITY, AEROSPACE TITANIUM ALUMINUM CASE: ANODIZED INSIDE AND OUTSIDE FOR SUPERIOR CORROSION PROTECTION. LENS MADE OF HIGH TENSION, SHATTERPROOF, AND SCRATCH RESISTANT POLYCARBONATE MATERIAL. DOUBLE O-RING SEALED - FIRE, WATER, MOISTURE, AND CHEMICAL RESISTANT. COMES WITH DELUXE HOLSTER, KEY CHAIN, SPARE BULB AND TWO LITHIUM (3V) BATTERIES. 1" DIA. X 6" LONG; WEIGHS 4 OZ. - BLACK CASE.
LIMITED LIFETIME MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Band Saws
|
COOL BLOCKS® FINE TUNE YOUR BAND SAW
|
| Cool Blocks 14" Delta
...plus other(s)
|
THE HEAT AND FRICTION CAUSED BY METAL GUIDE BLOCKS ARE ELIMINATED WITH PATENTED OLSON® COOL BLOCKS®, WHICH REPLACE YOUR STANDARD UPPER AND LOWER BLADE GUIDES, ALLOWING BLADES TO RUN COOLER, QUIETER AND LAST LONGER - FOUR-PIECE SETS REQUIRE NO BAND SAW MODIFICATION:
CB50000 - DELTA® 14"
|
|
|
|
Machinery Accessories - Band Saws
|
BRETT-GUARD® BAND SAW GUARD ADDS SAFETY AND VISIBILITY TO YOUR WORK
|
| Brett Band Saw Guard, Delta 14"
...plus other(s)
|
BUILT-IN 120V LIGHT NOT ONLY ILLUMINATES THE CUTTING LINE BUT ALSO BRIGHTENS THE WORK AREA WHEN YOU USE THE BRETT-GUARD® BAND SAW GUARD, FROM HTC PRODUCTS:
GUARD MOUNTS AT AN ANGLE TO PREVENT INTERFERENCE WITH SAW GUIDE COMPONENTS. A SINGLE KNOB ADJUSTS THE CLEAR, PLEXIGLAS SHIELD. ATTACHED TO THE BLADE SUPPORT ARM, IT MOVES AS YOU ADJUST DEPTH OF CUT. A-100-4 FITS JET® 14" BANDSAWS. A-100-14 FITS DELTA® 14" BANDSAWS. MOUNTING BRACKET, POWER CORD, HARDWARE AND INSTRUCTIONS INCLUDED. SHIPPING WEIGHT 6 LBS.
|
|
|
|
Machinery Accessories - Band Saws
|
ADJUST BANDSAW BLADE TENSION WITH THE FLIP OF A LEVER
|
| Carter Quick Release
|
USING THE CARTER QUICK RELEASE™ ON YOUR BANDSAW, IT'S EASY TO INSTANTLY RELIEVE TENSION TO PREVENT DAMAGE TO THE TIRE AND PROLONG THE LIFE OF THE BLADE AND SAW:
THREE POSITION LEVER CONTROL ALLOWS FULL RELEASE, PARTIAL TENSION OR FULL TENSION (FINE TUNE USING BANDSAW SCREW CONTROL). USE WITH BLADES FROM 1/8"W TO 3/4"W. INSTALLS IN JUST MINUTES; ALL HARDWARE PROVIDED ALONG WITH DETAILED, FULLY ILLUSTRATED MOUNTING INSTRUCTIONS. FITS JET, DELTA®, RIDGID® AND SEARS® CONTRACTOR 14" BANDSAWS. BUILT TO LAST WITH SOLID STEEL CONSTRUCTION AND HIGH QUALITY COMPONENTS. USA.
|
|
|
|
Machinery Accessories - Band Saws
|
CERAMIC GUIDE BLOCKS AND BEARINGS IMPROVE BAND SAW PERFORMANCE
|
| Ceramic Guide Blocks For Delta 14"
...plus other(s)
|
GET COOLER, QUIETER BANDSAW OPERATION WITH ALUMINA-OXIDE SPACEAGE CERAMIC GUIDEBLOCKS® AND THRUST BEARINGS. FOUR-PIECE GUIDE BLOCK SETS HANDLE UPPER AND LOWER GUIDES AND WORK WITH ANY BLADE WIDTH:
108-443 SET FITS DELTA® 14" BAND SAWS (THREE 1/2" X 1/2" X 3/4" BLOCKS; ONE 1/2" X 3/8" X 1"). 108-737 SET IS DESIGNED FOR JET®, GRIZZLY®, OTHER IMPORTED 14" PLUS GENERAL 15" BAND SAWS (FOUR 1/2" X 1/2" X 3/4" BLOCKS). 126-461 TWO-PIECE THRUST BEARING SET (1-3/16 DIA. W/WASHERS) REPLACES DELTA®, JET®, GRIZZLY® AND OTHER IMPORTED 14" BAND SAW UPPER AND LOWER BEARINGS. INSTALLATION INSTRUCTIONS INCLUDED. LIFETIME MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery Accessories - Band Saws
|
BOLT-ON BAND SAW FENCE FEATURES T-SLOT DESIGN AND LOTS OF OPTIONS
|
| 18" Capacity Bandsaw Fence System
...plus other(s)
|
THE PATENTED 18" CAPACITY BOLT-ON BAND SAW FENCE IS DESIGNED TO ATTACH TO 14" DELTA® AND MOST IMPORTED BAND SAWS (SAE AND METRIC FASTENERS INCLUDED) TO PROVIDE GREATER ACCURACY AND ADDITIONAL OPTIONS:
MOUNTING BRACKET, RAIL AND FENCE ARE EXTRUDED ALUMINUM FOR DURABILITY. T-SLOTS ON TOP AND FACE OF RAIL AND FENCE ALLOW SIMPLE JIG AND FIXTURE ATTACHMENTS, USING 1/4"-20 CAP SCREWS. FENCE AND RAIL ARE EACH 19-1/4" LONG - RAIL SLIDES TO ONE SIDE TO ALLOW USE OF MITER SLOT.
BY ADDING THE 4-1/2" RESAW GUIDE TO THE BOLT-ON BAND SAW FENCE, STOCK CAN BE RESAWN TO UNIFORM THICKNESS BY ELIMINATING "DRIFT" THAT CAN MAKE BAND SAW CUTS DIFFICULT: RESAW GUIDE BOLTS SECURELY ONTO FENCE RAIL AND ITS CURVED FACE SUPPORTS WOOD, BUT ALLOWS FEED ANGLES TO BE ADJUSTED WHILE THE DISTANCE BETWEEN GUIDE AND BLADE REMAINS CONSTANT.
WHEN STOP POSITIONS NEED TO BE ADJUSTED BY THOUSANDTHS OF AN INCH, ADD THE PATENTED MICROADJUSTER TO YOUR BOLT-ON BAND SAW FENCE: CLAMPED ONTO THE RAIL BESIDE THE FENCE, MICROADJUSTER ALLOWS FOR VERY PRECISE (0.008") ADJUSTMENTS TO FENCE SETTINGS.
ALL HARDWARE AND INSTRUCTIONS INCLUDED WITH EACH ITEM.
|
|
|
|
Machinery Accessories - Band Saws
|
BAND SAW FENCE SYSTEM FEATURES T-SLOT DESIGN AND LOTS OF OPTIONS
|
| Kreg Precision Band Saw Fence
...plus other(s)
|
THE PATENTED KREG™ KMS7200 PRECISION BAND SAW FENCE COMBINES UNPARALLELED RIGIDITY AND PRECISION:
TWO DIMENSIONAL ADJUSTMENT SIMPLIFIES SETTING THE FENCE PARALLEL TO THE BLADE. CUTTING ACCURACY AND REPEATABILITY ENHANCED BY PRECISION LENS CURSOR AND INCLUDED SCALE. RIGID, INTERLOCKING DOVETAIL DESIGN - FITS MOST DELTA®, JET®, GENERAL®, GRIZZLY® AND OTHER 14" BAND SAWS. OPTIONAL KMS7215 MICRO-ADJUSTER CLAMPS ONTO RAIL BESIDE FENCE ALLOWING VERY PRECISE (0.008") ADJUSTMENTS. OPTIONAL KMS7213 4-1/2" AND KMS7214 7" RESAW GUIDES ELIMINATE "DRIFT" SO STOCK CAN BE CUT TO UNIFORM THICKNESS. GUIDES BOLT ONTO FENCE RAIL BUT ALLOW FEED ANGLES TO BE ADJUSTED WHILE GUIDE-TO-BLADE DISTANCE REMAINS CONSTANT. ONE YEAR MANUFACTURERS WARRANTY. USA.
|
|
|
|
Machinery Accessories - Band Saws
|
REPLACEMENT SPRING ALLOWS YOU TO BOOST BANDSAW BLADE TENSION 200% TO 300%
|
| Cobra Coil
|
AFTER INSTALLING THE CARTER COBRA COIL™ BANDSAW TENSION SPRING REPLACEMENT IN YOUR 14" BANDSAW, YOU SHOULD BE ABLE TO CUT FASTER, MORE ACCURATELY, REDUCE MAINTENANCE AND REPLACE YOUR BLADES LESS FREQUENTLY:
3/4" OD X 2-9/16" SPRING ALSO ALLOWS USE OF LARGER BLADES THAT REQUIRE TENSION NOT AVAILABLE WITH STOCK SPRINGS. MANUFACTURED TO ASTM SPECIFICATIONS USING HEAT TREATED AND TEMPERED CHROMIUM VANADIUM STEEL. SIMPLE INSTALLATION (INSTRUCTIONS INCLUDED). FITS 14" JET®, DELTA®, GENERAL®, RIDGID®, RELIANT, GRIZZLY®, SEARS® CONTRACTOR AND MOST IMPORTED BANDSAWS. USA.
|
|
|
|
Machinery Accessories - Band Saws
|
CARTER ROLLER GUIDES FOR DELTA® 14" BAND SAWS
|
| 28-198 Carter Roller Guides
|
CARTER ROLLER GUIDES REPLACE YOUR EXISTING GUIDES TO PROVIDE EXCELLENT CONTROL FOR BOTH GENERAL BAND SAW WORK AND RESAWING:
SIDE ROLLERS HOLD THE BLADE IN PLACE AND THE REAR THRUST BEARING IS ENGAGED BY CUTTING PRESSURE TO PROVIDE UNEQUALLED BLADE SUPPORT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Band Saws
|
DELTA® BAND SAW BLADE GUIDES
|
| 14" Band Saw Blade Guides
...plus other(s)
|
DELTA® BLADE GUIDES HELP KEEP THE COMPANY'S 9" AND 14" BAND SAWS RUNNING SMOOTHER AND COOLER:
UPPER AND LOWER PHENOLIC GUIDES WILL NOT DAMAGE BLADE TEETH THROUGH ACCIDENTAL CONTACT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Band Saws
|
ADD RIP FENCE ACCURACY TO YOUR DELTA® 14" BANDSAW
|
| Band Saw Rip Fence, 24" Rails
...plus other(s)
|
A GENUINE DELTA® MODEL 28-858 24" RIP FENCE MOUNTS DIRECTLY ONTO THE TABLE AND CAN BE THE MOST VALUABLE ACCESSORY YOU CAN ADD TO YOUR DELTA® 14" BANDSAW:
USE THE FENCE AND SAW TO PREPARE STOCK FOR TURNING, SPLIT DOWELS, RIP BEVELS, RIP EXTRA THICK STOCK, RESAW ACCURATELY AND MUCH MORE. INCLUDES STURDY ALUMINUM BODY, REMOVABLE PIVOT BAR FOR FREEHAND RESAWING, GUIDE RAILS AND MOUNTING HARDWARE. WEIGHS 15 LBS. 28-856 - HAVING SIMILAR FEATURES, THIS SMALLER DELTA® RIP FENCE (NOT SHOWN) IS 12" LONG BUT ALSO FITS 14" BANDSAWS. WEIGHS 12 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Band Saws
|
DOUBLE THE HEIGHT CAPACITY OF YOUR DELTA® 14" BANDSAW WITH A FACTORY BUILT ATTACHMENT
|
| Height Attachment/14" Bs
|
WHEN YOU ADD THE MODEL 28-984 HEIGHT ATTACHMENT TO YOUR DELTA® 14" BANDSAW, THE CAPACITY UNDER THE GUIDE INCREASES FROM 6-1/4" TO 12-1/4"!
GREAT FOR RESAWING, CUTTING ANGULAR PIECES LIKE CHAIR BACKS AND FOR CUTTING THICK CORBELS OR LOGS. INCLUDES CAST BLOCK, DOWELS AND BOLT, EXTENSION AND FRONT AND BACK BLADE GUARDS. WEIGHS 12 LBS. MUST BE USED WITH 105" BLADES.
|
|
|
|
Machinery Accessories - Band Saws
|
IMPROVE THE ACCURACY OF YOUR 14" BANDSAW
|
| Roller Guides, Delta 14" (round)
...plus other(s)
|
USING COMPACT, RUGGED, LUBRICATED FOR LIFE BALL BEARING GUIDES AT THE SIDES AND REAR OF THE BLADE, CARTER GUIDE SETS GIVE AN INCREDIBLE BOOST TO BANDSAW PERFORMANCE:
EASY TO INSTALL, ADJUST AND USE ON AN EVERYDAY BASIS. ECCENTRIC MOUNTS ALLOW FOR PRECISE POSITIONING FOR SUPERIOR CUTTING PERFORMANCE. DESIGN ALLOWS TABLE TO TILT FULL 45° FOR VERSATILITY AND HANDLES BLADES FROM 1/8" TO 1". INCLUDES UPPER AND LOWER GUIDE ASSEMBLIES, UPPER AND LOWER MOUNTING STUDS, UPPER AND LOWER MOUNTING ADAPTER BLOCKS AND NECESSARY MOUNTING HARDWARE. CHECK BANDSAW MOUNTING SHAFT - OLDER SAWS HAVE HEX SHAPED SHAFTS. USA.
|
|
|
|
symbol next to the category that matches your desired product and select a sub-category link.
