|
|
|
Air Compressors
|
DELTA® 12 GALLON 135PSI AIR COMPRESSOR KIT
|
| 12 Gallon 135 Psi Air Compressor K
|
THE DELTA® SHOPMASTER™ CP503 12 GALLON AIR COMPRESSOR KIT FEATURES AN OIL FREE DESIGN FOR DURABILITY AND LOW MAINTENANCE:
3HP (1-1/2HP RUNNING), 120VAC, 15A MOTOR. 135PSI MAXIMUM PRESSURE; 4.9@40/3.5@90 AIR DELIVERY. BUILT-IN AUTOMATIC THERMAL OVERLOAD PROTECTION - TWO GAUGES AND REGULATORS. INCLUDES 25' AIR HOSE, 1/2" IMPACT WRENCH, SUCTION FEED SPRAY GUN, 3/8" RATCHET WRENCH, BLOW GUN, INFLATION KIT, 8 PIECE SOCKET SET WITH ADAPTER, TOOL OIL, TEFLON® TAPE, HEX WRENCH, COUPLER, 4 MALE FITTINGS, FEMALE FITTING AND CARRYING CASE. WEIGHS 77 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Bits Drill And Boring - Specialty
|
DELTA® HOLLOW CHISEL MORTISER INCLUDES CHISELS AND BITS
|
| 1/4" Mortise Chisel & Bit
...plus other(s)
|
HEAVY, CAST IRON AND STEEL FOR RIGIDITY AND STABILITY, THE DELTA® INDUSTRIAL MODEL 14-651 DELUXE MORTISER COMES WITH 1/4", 5/16", 3/8" AND 1/2" DELTA® CHISELS AND BITS:
120VAC, 1/2 HP, 4.8A, 1PH, 1,750 RPM INDUCTION MOTOR - 3/8" CHUCK WITH KEY. 5" MAXIMUM STROKE; UNIQUE, GAS-FILLED HEAD STABILIZER. 9-3/8" UNDER HEAD TO BASE, 3-3/4" UNDER HOLDDOWN. INCLUDED RISER BLOCK ADDS 1-3/4" CAPACITY UNDER HEAD. EASY, OPEN ACCESS TO DRILL CHUCK FOR BIT CHANGING. 12-1/4" X 8-1/4" CAST IRON TABLE WITH THROUGH HOLE; 16-1/4" X 13-1/2" BASE. RACK & PINION ADJUSTABLE 2-15/16" X 5-13/16" FENCE (EACH SIDE), 13-5/8" OVERALL. MORTISING HEAD CAN TURN 180° FOR OFF TABLE MORTISING. MULTI-POSITION FEED LEVER. PRE-DRILLED BASE FOR BENCH MOUNTING. TOOL AND CHISEL TRAY AND INSTRUCTION MANUAL INCLUDED. 30"H X 13-1/2"W X 16-1/4"D OVERALL. NET WEIGHT 55 LBS.; 77 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
REPLACEMENT MORTISE CHISELS HAVE 5/8" CHISEL SHANKS: 17-908 - 1/4" MORTISE, 1-7/8" CUT DEPTH; 4-1/4"L CHISEL, 6-1/8"L BIT. 17-909 - 5/16" MORTISE, 1-7/8" CUT DEPTH; 4-1/4"L CHISEL, 6-1/8"L BIT. 17-910 - 3/8" MORTISE, 3" CUT DEPTH; 5-1/2"L CHISEL, 7-1/8"L BIT. 17-911 - 1/2" MORTISE, 3" CUT DEPTH; 5-1/2"L CHISEL, 7-1/8"L BIT.
|
|
|
|
Dust Collection - Air Filtration Systems
|
DELTA® FIXED AND PORTABLE AIR CLEANERS FILTER OUT POTENTIALLY HAZARDOUS DUST
|
| Ambient Air Cleaner
...plus other(s)
|
THE DELTA® MODEL 50-875 AMBIENT AIR CLEANER CAN HANG INCONSPICUOUSLY FROM THE CEILING OR BE BENCH MOUNTED, QUIETLY SCRUBBING THE AIR:
120V, 1/5HP, 1PH, 1,025 RPM MOTOR - 540, 730, 1,200 CFM OPERATION. REMOTE CONTROL FOR EASY OPERATION (REQUIRES 2 AAA BATTERIES, NOT INCLUDED). CAN BE SET TO RUN UP TO 7-1/2 HOURS (30 MINUTE INCREMENTS) THEN SHUT OFF, AUTOMATICALLY. FILTERS ARE EASY TO CHANGE WITHOUT TOOLS AND TRAP UP TO 91% OF 1 MICRON PARTICLES. INCLUDES FILTERS, PATENTED DIRTY FILTER INDICATOR, HANGING HOOKS, POWER CORDS, MOUNTING HARDWARE AND INSTRUCTIONS.
EASY GRIP HANDLES MAKE MOVING THE DELTA® SHOPMASTER™ MODEL AP-200 PORTABLE AIR CLEANER QUICK AND EASY:
120VAC, 1/8HP, 1PH, 1,050 RPM MOTOR; 850 CFM (1 MICRON FILTRATION). FILTER SYSTEM INCLUDES DISPOSABLE PLEATED OUTER FILTER AND THREE POCKET INNER FILTER. NO TOOLS REQUIRED FOR FILTER REPLACEMENT. DURABLE, POWDER COATED, ALL STEEL CONSTRUCTION. INCLUDES FOUR EYE BOLTS AND FLANGE NUTS FOR SUSPENDING FROM CEILING (CHAINS NOT INCLUDED), FOUR NON-MARRING RUBBER FEET, 6'L POWER CORD WITH ON/OFF ROCKER SWITCH AND INSTRUCTIONS.
EACH IS 12"H X 24"W X 30"L. 50 LBS. NET WEIGHT; 62 LBS. SHIPPING WEIGHT. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Air Filtration Systems
|
DELTA® AMBIENT AIR CLEANER WITH WORKLIGHT...BREATHE EASIER, SEE BETTER
|
| Ambient Air Purifier W/work Light
|
THE REMOVAL OF WOOD DUST PARTICLES FROM THE AIR HAS BECOME A MAJOR CONCERN FOR MANY SHOP OWNERS AND USERS. WITH THE DELTA® SHOPMASTER™ MODEL AP-100 YOU CAN LOCATE AN AMBIENT AIR CLEANER DIRECTLY OVER YOUR WORKSPACE, WHERE IT WILL BE MORE EFFICIENT, AND PROVIDE BETTER LIGHTING, AS WELL:
FILTER SYSTEM INCLUDES TWO BLACK, OPEN-CELL FILTERS AND TWO 5 MICRON INNER BAG FILTERS. 120VAC MOTOR - 400 CFM WITH FILTERS, 450 CFM WITHOUT. LIGHT PROVIDED BY TWO 1" X 18" WHITE FLOURESCENT BULBS (BULBS NOT INCLUDED). INCLUDES EYE BOLTS AND FLANGE NUTS FOR SUSPENDING FROM CEILING (CHAIN NOT INCLUDED), ON/OFF PULL CORDS FOR LAMP AND FAN, 6'L GROUNDED POWER CORD WITH IN-LINE ON/OFF SWITCH, EASY-GRIP HANDLE FOR PORTABILITY AND INSTRUCTIONS. 20-1/2"H X 23"W X 23"D. WEIGHS 40 LBS. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Air Filtration Systems
|
TAKE THIS DELTA® PORTABLE AIR CLEANER WHERE AND WHEN IT'S NEEDED
|
| Ambient Air Cleaner, 850 Cfm
...plus other(s)
|
EASY GRIP HANDLES MAKE MOVING THE DELTA® SHOPMASTER™ MODEL AP-200 PORTABLE AIR CLEANER QUICK AND EASY:
120VAC, 1/8HP, 1PH, 1,050 RPM MOTOR; 850 CFM (1 MICRON FILTRATION). FILTER SYSTEM INCLUDES DISPOSABLE PLEATED OUTER FILTER AND THREE POCKET INNER FILTER. NO TOOLS REQUIRED FOR FILTER REPLACEMENT. DURABLE, POWDER COATED, ALL STEEL CONSTRUCTION. INCLUDES FOUR EYE BOLTS AND FLANGE NUTS FOR SUSPENDING FROM CEILING (CHAINS NOT INCLUDED), FOUR NON-MARRING RUBBER FEET, 6'L POWER CORD WITH ON/OFF ROCKER SWITCH AND INSTRUCTIONS. 12"H X 24"W X 30"L. WEIGHS 50 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Dust Collectors Common Brands
|
DELTA 1 HP DUST COLLECTOR IS AVAILABLE IN BAG OR CANISTER FILTER
|
| 1hp Dust Collector-bag Type
...plus other(s)
|
|
1HP TEFC MOTOR FOR LONG SERVICE LIFE IN DUST ENVIRONMENTS CHOOSE BAG FILTER (1 MICRON) OR CANISTER FILTER (2 MICRON) MODEL PLASTIC COLLECTION BAG TO FORCE RETURN AIR THROUGH FILTER STEEL IMPELLER WITH CURVED BLADES PRODUCES MAXIMUM AIR FLOW STURDY ENCLOSED BASE WITH 4 SWIVEL CASTERS 2 YEAR MANUFACTURER'S WARRANTY IMPORTED
|
|
|
|
Dust Collection - Dust Collectors Common Brands
|
NEW DELTA® INDUSTRIAL DUST COLLECTORS FILTER BETTER, ASSEMBLE EASIER
|
| Dust Collector 1-1/2hp 1200cfm
...plus other(s)
|
DELTA® INDUSTRIAL DUST COLLECTORS USE HIGHLY EFFICIENT 1 MICRON FILTER MATERIAL, SNAP IN BAG RINGS TO ELIMINATE LOCK STRAPS AND HOUSINGS THAT CAN BE MOUNTED WITH DUST PORT(S) FACING UP OR DOWN. STEEL BASES WITH 4 CASTERS INCLUDED:
50-760 - 1,200 CFM SINGLE BAG, 20.5 SQ. FT. FILTER W/2.4 CU. FT. CHIP CAPACITIES, TWO 4" AND ONE 5" MAIN DUST PORTS - 1-1/2 HP, 120/240VAC, 1PH, 83"H X 35"W X 19"D, WEIGHS 100 LBS. 50-761 - 2,100 CFM DOUBLE BAG, 41 SQ. FT. FILTER W/4.8 CU. FT. CHIP CAPACITIES, THREE 4" AND ONE 7" MAIN DUST PORTS - 2 HP, 230VAC, 1PH, 87"H X 57"W X 19"D, WEIGHS 132 LBS. 50-762 - 3,100 CFM DOUBLE BAG, 57.2 SQ. FT. FILTER W/7.6 CU. FT. CHIP CAPACITIES, FOUR 4" AND ONE 8" MAIN DUST PORTS - 3 HP, 230/460VAC, 3PH, 110"H X 66"W X 23"D, WEIGHS 186 LBS. 50-763 - SAME AS 50-762 BUT WITH 3 HP, 230VAC, 1PH MOTOR. 50-764 - 4,600 CFM DOUBLE BAG, 140.8 SQ. FT. FILTER W/12.4 CU. FT. CHIP CAPACITIES, FOUR 5" AND ONE 10" MAIN DUST PORTS - 5 HP, 230/460VAC, 3PH, 110"H X 75"W X 26"D, WEIGHS 260 LBS. 50-765 - SAME AS 50-764 BUT WITH 5 HP, 230VAC, 1PH MOTOR. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
Click for More Info
|
Dust Collection - Dust Collectors Common Brands
|
NEW DELTA® INDUSTRIAL DUST COLLECTORS FILTER BETTER, ASSEMBLE EASIER
|
| Dust Collector 3hp 3ph 3100cfm
...plus other(s)
|
DELTA® INDUSTRIAL DUST COLLECTORS USE HIGHLY EFFICIENT 1 MICRON FILTER MATERIAL, SNAP IN BAG RINGS TO ELIMINATE LOCK STRAPS AND HOUSINGS THAT CAN BE MOUNTED WITH DUST PORT(S) FACING UP OR DOWN. STEEL BASES WITH 4 CASTERS INCLUDED:
50-760 - 1,200 CFM SINGLE BAG, 20.5 SQ. FT. FILTER W/2.4 CU. FT. CHIP CAPACITIES, TWO 4" AND ONE 5" MAIN DUST PORTS - 1-1/2 HP, 120/240VAC, 1PH, 83"H X 35"W X 19"D, WEIGHS 100 LBS. 50-761 - 2,100 CFM DOUBLE BAG, 41 SQ. FT. FILTER W/4.8 CU. FT. CHIP CAPACITIES, THREE 4" AND ONE 7" MAIN DUST PORTS - 2 HP, 230VAC, 1PH, 87"H X 57"W X 19"D, WEIGHS 132 LBS. 50-762 - 3,100 CFM DOUBLE BAG, 57.2 SQ. FT. FILTER W/7.6 CU. FT. CHIP CAPACITIES, FOUR 4" AND ONE 8" MAIN DUST PORTS - 3 HP, 230/460VAC, 3PH, 110"H X 66"W X 23"D, WEIGHS 186 LBS. 50-763 - SAME AS 50-762 BUT WITH 3 HP, 230VAC, 1PH MOTOR. 50-764 - 4,600 CFM DOUBLE BAG, 140.8 SQ. FT. FILTER W/12.4 CU. FT. CHIP CAPACITIES, FOUR 5" AND ONE 10" MAIN DUST PORTS - 5 HP, 230/460VAC, 3PH, 110"H X 75"W X 26"D, WEIGHS 260 LBS. 50-765 - SAME AS 50-764 BUT WITH 5 HP, 230VAC, 1PH MOTOR. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Dust Collectors Common Brands
|
DELTA® CANISTER STYLE DUST COLLECTOR IS EFFICIENT AND EASY TO CLEAN
|
| 1-1/2hp Dust Collector W/canister
|
THE DELTA® INDUSTRIAL MODEL 50-850A CANISTER DUST COLLECTOR COMES WITH A POWERFUL INDUCTION MOTOR AND 2 MICRON CANISTER FILTER FOR CLEANER, HEALTHIER AIR:
1-1/2 HP, 120VAC, 1PH MOTOR. 1,200 CFM - 12.75 INCHES H20 MAXIMUM STATIC PRESSURE. 33.1 SQ. FT. FILTRATION SURFACE; 6.3 CU. FT. CHIP COLLECTION BAG CAPACITY - EASILY CLEANED BY TURNING ATTACHED HANDLE. INCLUDES TWO 6 MIL PLASTIC CHIP BAGS, SUPPORT DRUM, TWO 4" DIA. DUST PORTS, 6' HOSE, ONE INTAKE CAP, STEEL BASE, FOUR SWIVEL CASTERS, POWER CORD WITH PLUG PLUS AN INSTRUCTION MANUAL. . 88"H X 37"W X 27"D. NET WEIGHT 100 LBS. SHIPPING WEIGHT 120 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Not Listed Elsewhere
|
WHY DIDN'T ANYONE THINK OF THIS YEARS AGO?
|
| Less-mess Dust Collector
|
|
SIMPLE, EFFECTIVE IDEA FOR COLLECTING DUST FROM OPEN STAND TABLE SAWS. FITS ALL DELTA® CONTRACTOR AND MOST CRAFTSMAN TABLE SAWS WITH OPEN STANDS. VERY HEAVY DUTY CANVAS FEATURES HEAVY THREAD AND DOUBLE STITCHING. BAG ATTACHES TO SAW BASE WITH INCLUDED SNAPS. REQUIRES SIMPLE DRILLING TO INSTALL. TEMPLATE SHOWS WHERE TO DRILL. ONCE SNAPS ARE ATTACHED, JUST EMPTY BAG ONCE IN AWHILE. USA.
|
|
|
|
Dust Collection - Plastic Hose & Fittings
|
DELTA® SHOPMASTER™ PORTABLE DUST COLLECTOR GOES TO WHERE THE DUST IS
|
| 4" Dust Connector Kit
...plus other(s)
|
STOP THE DUST AT A VARIETY OF SOURCES USING A DELTA® SHOPMASTER™ AP-300 PORTABLE DUST COLLECTOR:
110/240V, 3/4HP MOTOR PRODUCES 550 CFM AT 3,450 RPM. STEEL IMPELLER IS BALANCED AND CURVED FOR OPTIMUM AIR MOVEMENT AND WEAR PROTECTION. 21"W X 38"L X 38"H. NET WEIGHT 39 LBS.; SHIPPING WEIGHT 50 LBS. INCLUDES 4" X 10' HOSE WITH 9-1/2" X 5-1/2" METAL DUST HOOD, 30 MICRON DUST COLLECTION BAG, ANGLED SUPPORT TUBE, ADJUSTABLE SUPPORT ARM, CLAMPS, HARDWARE AND COMPLETE INSTRUCTIONS. OPTIONAL AP-050 4" ACCESSORY KIT COMES WITH 4" DIA. X 20' LONG HOSE, 3 ELBOWS, 2 "T" CONNECTORS, 8 QUICK CONNECT CONNECTORS, 4 BLAST GATES, TWO 4" HOSE-TO-HOSE CONNECTORS, 12 WALL CLAMPS, 14 HOSE CLAMPS PLUS HARDWARE PACKS FOR WALL CLAMPS, SCREWS AND ANCHORS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Hand Tools - Turning
|
DELTA® MICRO WOODTURNING TOOL SET - FIVE DIFFERENT SHAPES
|
| Set Of 5 Micro Turning Tools
|
IDEAL FOR SMALL OR DETAIL WORK, THE DELTA® 46-671 5-PIECE MICRO WOODTURNING TOOL SET COMES WITH A 1/4" ROUGHING OUT GOUGE, 1/8" SPINDLE GOUGE; 1/4" ROUND NOSE SCRAPER; 1/4" SKEW CHISEL AND 1/16" PARTING TOOL - EACH TOOL IS ONLY 10" LONG OVERALL:
HIGH-GRADE, STEEL ALLOY BLADES - PRECISION-GROUND CUTTING EDGES PROVIDE CLEANER, SMOOTHER TURNING. HARDWOOD HANDLES FOR BETTER CONTROL. METAL FERRULES FOR LONGER TOOL LIFE. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
THE ONE LID STAY THAT IS CONVERTIBLE, REVERSIBLE, ADJUSTABLE AND DEMOUNTABLE
|
| Convertible Lid Stay
|
STRONG, DIE CAST NICKEL PLATED DELTA CONVERTIBLE LID STAYS STOP THE LID AT INTERMEDIATE POSITIONS AND ALLOW YOU TO PRECISELY ADJUST THE BRAKING POWER:
8"L STAY SUPPORTS LIDS UP TO 20 LBS. ALL HOLES FIT 32MM CENTERS AND CAN BE PLACED 27MM OR 32MM FROM THE EDGE. SIMPLY FASTEN THE BRACKETS TO THE CABINET, THEN SNAP THE SUPPORT INTO PLACE. TENSION CAN BE REVERSED TO SUIT LIFT-UP OR DROP-DOWN FUNCTIONS. OPENING ANGLE ADJUSTS FROM 75° TO 90° BY BRACKET RELOCATION. INSTRUCTIONS INCLUDED (MOUNTING SCREWS NOT INCLUDED).
|
|
|
|
Hardware Drawer Slides - Not Listed Elsewhere
|
DELTA CONCEALED DRAWER SLIDES "HIDE" WITH THE DRAWER OPEN
|
| Csm-2000-12" Drwr Slde Ply
...plus other(s)
|
RATED AT 100 LBS., SIDE MOUNTED DELTA CSM 2000 DRAWER SLIDES UTILIZE A CANTILEVER SUSPENSION SYSTEM TO KEEP THE HARDWARE CONCEALED:
BUILT-IN RIGHT ANGLE FLANGES FOR FAST FITTING WITH NO MEASURING - HEAVY GAUGE STEEL CONSTRUCTION. BUILT-IN ADJUSTMENTS ELIMINATE SIDE PLAY (1/2" SIDE CLEARANCE REQUIRED). SELF-CLOSING FEATURE KEEPS DRAWERS FROM REMAINING SLIGHTLY OPEN. BLACK EPOXY COATING (MOUNTING SCREWS AND INSTRUCTIONS INCLUDED). NOTE: SIZES LONGER THAN 18" REQUIRE 1-5/8" BEHIND THE DRAWER. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Drawer Slides - Not Listed Elsewhere
|
DELTA ST750 INVISIBLE DRAWER SLIDES
|
| 12" Invisible Side Mount Drawer Slide
...plus other(s)
|
RATED AT 75 LBS., DELTA ST750 INVISIBLE DRAWER SLIDES HAVE FEATURES THAT SPEED INSTALLATION WHILE PROVIDING SMOOTH, TROUBLE FREE OPERATION - CAN BE MOUNTED USING THE 32MM SYSTEM:
CORNER ROLLERS ARE NON-HANDED AND SELF-ALIGNING. POSITIVE OUT STOP AND HOLD OPEN FEATURE - ZINC PLATED (MOUNTING SCREWS INCLUDED). OPTIONAL ADJUSTMENT FIXTURE ALLOWS VERTICAL ALIGNMENT WITHOUT REMOVAL OF DRAWER. OPTIONAL ADJUSTABLE REAR BRACKET LETS YOU SQUARE DRAWER FRONT WITH FACE FRAME, INSTANTLY. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Drawer Slides - Roller Box Drawer
|
UNIQUE DELTA DRAWER SLIDE HANDLES 50 POUND LOADS
|
| Delta 100 Drawer Slide
...plus other(s)
|
EASY AND FAST INSTALLATION MAKES THESE UNIQUE DELTA DG100 DRAWER SLIDES THE CHOICE FOR NEW CONSTRUCTION OR RETROFITTING:
DISC ROLLERS PROVIDE SMOOTH AND EASY MOVEMENT; POSITIVE STOP AND RELEASE LEVER FOR EASY DRAWER REMOVAL. 22-1/2" METAL TRACK CAN BE TRIMMED TO LENGTH. COMPLETE PACKAGE INCLUDES 20 GA. PAINTED STEEL TRACK, PLASTIC WING TO ATTACH TO DRAWER, ADJUSTABLE REAR MOUNTING BRACKET, TWO DISC ROLLERS, MOUNTING SCREWS AND COMPLETE INSTRUCTIONS. USA.
|
|
|
|
Hardware Drawer Slides - Roller Box Drawer
|
DELTA ST750 INVISIBLE DRAWER SLIDES - BULK QUANTITIES, LOW PRICES
|
| 10 Pr Bx 14" Invisible Slide
...plus other(s)
|
WITH THESE 14" AND 20" DELTA DRAWER SLIDES ROLLERS MOUNT TO THE REAR OF THE DRAWER BOX SO NO HARDWARE IS EXPOSED ON THE DRAWER SIDES:
1/2" ± 1/32" SIDE CLEARANCE REQUIRED. EXCEED BIFMA, KCMA AND BHMA 50 LB. CLASS STANDARDS. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Home Improvement - Automotive
|
SMITH & WESSON® FLASHLIGHTS - BRIGHT, DEPENDABLE AND RUGGED
|
| Delta Force Tactical Flashlight
...plus other(s)
|
SW300TWT GALAXY™ 3 LED FLASHLIGHT IS EXCEPTIONALLY LIGHTWEIGHT (4 OZ.) AND DURABLE: ULTRA-BRIGHT WHITE LEDS OFFER FULL SPECTRUM COLOR FOR TRUE LIGHT AND LAST OVER 10 YEARS. SHATTERPROOF LED DIODES LAST OVER 110,000 HOURS AND HAVE UP TO 30 HOURS OF CONTINUOUS BATTERY LIFE. SMALL LIGHTWEIGHT CONSTRUCTION MAKES IT PERFECT FOR POCKETS, PURSES, BACKPACKS AND MORE. INCLUDES 2 AA BATTERIES. 1" DIA. X 6" LONG - TITANIUM CASE (COLOR). SW320XWT 3XGALAXY 2 IN 1 FLASHLIGHT (NOT SHOWN) COMBINES AN ULTRA-BRIGHT XENON BULB WITH THE ENERGY SAVING EFFICIENCY OF 3 WHITE LEDS: PUSH BUTTON SWITCH FOR LED MODE. STOPLIGHT™ LOCK-OUT TAIL CAP FOR XENON MODE. KNURLED GRIP FOR SECURITY. CONSTRUCTED USING PRECISION MACHINED ANODIZED ALUMINUM FOR SUPERIOR CORROSION RESISTANCE. KNURLED GRIP FOR SECURITY. COMES WITH DELUXE NYLON HOLSTER, SPARE XENON BULB AND 2 AA BATTERIES. 1-1/2" DIA. X 7" LONG; WEIGHS 6-1/2 OZ. - BLACK CASE. SW750LH GALAXY™ LUXEON 1W LED HEAD LIGHT COMBINES STATE OF THE ART 30 LUMEN LUXEON™ BULB BRIGHTNESS AND RANGE WITH LED EFFICIENCY: 6 CONTINUOUS HOURS OF OPERATION WITH NEW BATTERIES - OVER 100,000 HOURS OF BULB LIFE. FIRE, WATER, CORROSION, SHATTER, SCRATCH AND IMPACT RESISTANT. INCLUDES ADJUSTABLE HEAD STRAP FOR SECURE, COMFORTABLE FIT. REQUIRES 3 AAA BATTERIES (NOT INCLUDED). 1-3/4" DIA. X 2-1/2" LONG; WEIGHS 4.9 OZ. - BLACK CASE. SW422CBO CLASSIC COMBO INCLUDES A COMPACT FLASHLIGHT WITH ULTRA BRIGHT XENON BULB PLUS A DUAL LOCK-BACK KNIFE: XENON BULB PROVIDES POWERFUL WHITE LIGHT 200% BRIGHTER THAN STANDARD BULBS - ADJUSTABLE BEAM GIVES USER GREATER CONTROL AND PRECISION. ANODIZED AEROSPACE ALUMINUM BODY HAS A KNURLED FINISH FOR EASY GRIPPING. SPARE BULB AND 2 AA BATTERIES INCLUDED. 1" DIA. X 6-1/4" LONG; WEIGHS 4 OZ. - BLACK CASE KNIFE FEATURES TWO DURABLE 3" LONG STAINLESS STEEL LOCKING BLADES - ONE IS A RAZOR SHARP STRAIGHT EDGE FOR GENERAL USE; THE SECOND IS SERRATED FOR MORE DIFFICULT CUTTING. THUMB SCREW FOR EASY ONE HANDED OPENING - BELT CLIP INCLUDED. SW720LX GALAXY™ 1W LUXEON LED FLASHLIGHT IS MOST NOTABLE FOR ITS EXCEPTIONAL BRIGHTNESS. THE HIGH-FLUX LUXEON™ BULB PROVIDES THE LONG LASTING LIFE OF AN LED BUT IS 10 TIMES BRIGHTER THAN A STANDARD LED: PRECISION MACHINED ANODIZED ALUMINUM WITH KNURLED GRIP AND PROTECTIVE NOTCHES TO ENSURE NO SLIPPING OR ROLLING. FIRE, WATER, CORROSION, SHATTER, SCRATCH AND IMPACT RESISTANT. DELUXE HOLSTER, LANYARD AND 2 AA BATTERIES INCLUDED. 1-1/4" DIA. X 6-1/2" LONG; WEIGHS 3.5 OZ. - BLACK CASE. SW900XWT 9XGALAXY 2 IN 1 FLASHLIGHT IS THE ULTIMATE COMBINATION OF POWER AND VERSATILITY: FLASHLIGHT COMBINES AN ULTRA BRIGHT XENON BULB (66 LUMENS) WITH THE POWER AND ENERGY SAVING EFFICIENCY OF A 9 WHITE LED FLASHLIGHT. TWIN SWITCH TECHNOLOGY FOR FAST, EASY SELECTION BETWEEN MODES. ANTI-ROLL BAR AND WATER RESISTANT BODY ENSURE MAXIMUM SAFETY IN THE WORKPLACE. COMES WITH DELUXE HOLSTER, SPARE BULB AND TWO LITHIUM (3V) BATTERIES. 1-1/2" DIA. X 7" LONG; WEIGHS 6.5 OZ. - BLACK CASE. SW700XT DELTA FORCE TACTICAL FLASHLIGHT (NOT SHOWN) PRODUCES 93 LUMENS OF BRILLIANT WHITE LIGHT FROM A POWERFUL XENON BULB INSIDE A HIGH DENSITY, AEROSPACE TITANIUM ALUMINUM CASE: ANODIZED INSIDE AND OUTSIDE FOR SUPERIOR CORROSION PROTECTION. LENS MADE OF HIGH TENSION, SHATTERPROOF, AND SCRATCH RESISTANT POLYCARBONATE MATERIAL. DOUBLE O-RING SEALED - FIRE, WATER, MOISTURE, AND CHEMICAL RESISTANT. COMES WITH DELUXE HOLSTER, KEY CHAIN, SPARE BULB AND TWO LITHIUM (3V) BATTERIES. 1" DIA. X 6" LONG; WEIGHS 4 OZ. - BLACK CASE.
LIMITED LIFETIME MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Drill Presses
|
TURN YOUR DRILL PRESS INTO A MORTISING MACHINE WITH A DELTA® MORTISING ATTACHMENT KIT
|
| 17-924 Mortising Kit
|
THE VERSATILE DELTA® MODEL 17-924 MORTISING ATTACHMENT KIT COMES WITH FOUR POPULAR MORTISING CHISEL AND BIT SETS PLUS A HANDY CARRYING CASE THAT HOLDS EVERYTHING FOR EASY STORAGE:
ATTACHES TO DRILL PRESS IN MINUTES WITHOUT THE NEED FOR INSTALLATION TOOLS. LARGE 4" CAPACITY UNDER HOLD DOWN - 2-3/4" CAPACITY FROM ENDS OF CLAMP RODS TO FENCE. COMES WITH 1/4" X 1/4", 5/16" X 5/16", 3/8" X 3/8" AND 1/2" X 1/2" HOLLOW CHISELS AND DRILL BITS, SPECIAL ALIGNMENT GAUGE FOR FAST, ACCURATE SET UPS, LARGE, CAST IRON FENCE ASSEMBLY, BUSHINGS, GUIDES, HEX WRENCH AND INSTRUCTIONS. FITS DRILL PRESSES WITH 38MM, 48MM, 50.8MM AND 66MM QUILL DIAMETERS, INCLUDING DELTA® MODELS 11-090, 11-980, 11-990, 14-040, 14-070, 17-900, 17-925 AND 17-965, PLUS SEARS® MODELS 21313, 21315 AND 21317. KIT WEIGHS 16 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Drill Presses
|
DELTA® DRILL PRESS SHIELD IS A HANDY WAY TO DEFLECT SHAVINGS
|
| Drill Press Shield
|
|
CLEAR PLASTIC SHIELD MOUNTS ONTO ANY DRILL PRESS WITH A 1-1/2 TO 3-11/16 DIA. COLUMN. IMPORTED.
|
|
|
|
Machinery Accessories - Drill Presses
|
WOODTEK® ATTACHMENT CONVERTS YOUR DRILL PRESS INTO A MORTISING MACHINE
|
| Mortising Attachment For Wdtk Dp
|
THE WOODTEK® MORTISING ATTACHMENT INSTALLS EASILY AND ADDS A SIGNIFICANT CAPABILITY TO YOUR DRILL PRESS:
INCLUDES CAST IRON CHISEL HOLDER (CHISELS NOT INCLUDED), FENCE ASSEMBLY, BUSHINGS, GUIDES, COLLAR, STEEL RODS AND HARDWARE. IN ADDITION TO WOODTEK® 21" DRILL PRESSES, THE ATTACHMENT FITS DELTA® AND CRAFTSMAN® 20" DRILL PRESSES AS WELL AS OTHERS WITH 2-15/16" COLLARS. 11-1/4 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Grinders
|
TRU-GRIND SHARPENING SYSTEM
|
| Tru-grind Sharpening System
...plus other(s)
|
THE WOODCUT® TRU-GRIND SHARPENING SYSTEM IS A COMPACT WELL DESIGNED SYSTEM THAT WILL SHARPEN A FULL RANGE OF WOODTURNING TOOLS FROM BOWL GOUGES TO SKEW CHISELS. THE SYSTEM INCLUDES THE TRU-GRIND TOOL HOLDER, TRU-GRIND BASE SLIDE, INSTRUCTIONAL DVD AND BOOKLET DESCRIBING SET UP AND USE. AN OPTIONAL STURDY REST MAKES SHARPENING SCRAPERS AND OTHER TOOLS FASTER AND EASY:
THE ADJUSTABLE BASE SLIDE IS FIRST MOUNTED UNDER THE LEFT GRINDING WHEEL BASE WILL FIT UNDER RIGHT SIDE OF A BENCH GRINDER BY SIMPLY UNBOLTING AND REPOSITIONING THE SLIDE ON THE BASE PLATE. THE TOOL HOLDER IS THEN HELD INTO THE PIVOTING CUP ON THE END OF THE BASE SLIDE AND IS USED FOR SHARPENING GOUGES, SCRAPERS AND CHISELS. TOOLS UP TO 1-1/2" WIDE ARE SECURELY LOCKED INTO THE TOOL HOLDER USING THE TOP MOUNTED BRASS TIGHTENING KNOB. THE TOOL HOLDER HAS A DUAL PIVOTING DESIGN WITH SEVERAL NOTCHED LOCKING POSITIONS FOR COMMONLY USED ANGLES. OPTIONAL RIGHT AND LEFT STURDY RESTS BOLT ONTO EXISTING BASE SLIDES AND CAN BE PIVOTED OUT OF THE WAY WHEN NOT IN USE. OPTIONAL RIGHT AND LEFT BASE SLIDES ARE AVAILABLE AND COME PRE-POSITIONED TO FIT UNDER EITHER SIDE OF THE BENCH GRINDER. A FULLY OUTFITTED BENCH GRINDER SHARPENING SYSTEM WOULD INCLUDE A TRU-GRIND SHARPENING SYSTEM (TOOL HOLDER AND BASE SLIDE), AN ADDITIONAL BASE SLIDE AND A STURDY REST. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
DELTA BENCH GRINDERS - GR-275. DEWALT BENCH GRINDERS - 114-161. STEEL CITY BENCH GRINDERS - 015-420. CGW GRINDING WHEELS - 105-677. NORTON GRINDING WHEELS - 138-860. PACIFIC GRINDING WHEELS - 106-856. DIAMOND WHEEL DRESSER - 110-849. WHEEL DRESSING STICK - 145-001.
|
|
|
|
Machinery Accessories - Grinders
|
DELTA® WET/DRY SHARPENING CENTER
|
| 8" 1000 Grit Repl Wheel
...plus other(s)
|
|
|
|
Machinery Accessories - Jointers & Planers
|
WOODTEK® 6" AND 8" INDEXABLE JOINTER HEADS RUN QUIETER, CUT SMOOTHER
|
| 6" Replacement Spiral Cutterhead
...plus other(s)
|
WOODTEK® 6" AND 8" INDEXABLE JOINTER HEADS FEATURE SEPARATE CARBIDE CUTTERS, EACH WITH FOUR USABLE SIDES:
0.550" X 0.550" CUTTERS CAN BE INDIVIDUALLY ROTATED IF ONE SIDE BECOMES DAMAGED, EXTENDING JOINTER HEAD LIFE AND ENSURING SHARPER CUTS. UNIQUE SPIRAL DESIGN MEANS LESS NOISE THAN CONVENTIONAL PLANERS, SMALLER CHIPS TO EASE DUST COLLECTION AND SMOOTH, ALMOST FINISH QUALITY, SURFACES. 120-041 - 6" HEADS HAVE 42 CARBIDE CUTTERS, WEIGH 10 LBS., AND FIT WOODTEK®, DELTA® PROFESSIONAL AND DELUXE SERIES AND SELECT JET® AND POWERMATIC® 6" JOINTERS. 120-044 - 8" HEADS HAVE 54 CARBIDE CUTTERS, WEIGH 16 LBS., AND FIT WOODTEK® 8" JOINTERS; DO NOT FIT DELTA® PROFESSIONAL SERIES AND DJ-20 8" JOINTERS. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Jointers & Planers
|
HAVE NEW PLANER OR JOINTER KNIVES ON HAND BEFORE YOU NEED THEM
|
| 15" Planer Knives
...plus other(s)
|
RUNNING AT 80 OR 64 CUTS PER INCH, THE WOODTEK® 15" TWO SPEED PLANER LEAVES A SURFACE THAT ONLY REQUIRES MINIMAL SANDING:
CONTROLLED BY A LOCKING HANDWHEEL, THE CUTTERHEAD ASSEMBLY MOVES 8-1/2" UP OR DOWN ON FOUR THREADED STEEL POSTS. RESHARPENABLE KNIVES CAN BE PRECISELY ADJUSTED WITHOUT REMOVING FROM THE CUTTERHEAD. HELICALLY SERRATED, STEEL INFEED ROLLER USES CHAIN AND SPROCKET DRIVE WHILE THE SMOOTH STEEL OUTFEED ROLLER WON'T MAR FRESHLY PLANED SURFACES. CAST IRON TABLE HAS TWO, ADJUSTABLE BED ROLLERS. GRAVITY OPERATED METAL FINGERS PREVENT KICKBACK. OPEN METAL STAND, KNIVES, ANGLED DUST COLLECTION HOOD, WRENCHES, KNIFE SETTING JIG, HARDWARE AND INSTRUCTION MANUAL INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 3HP, 230V, 18A, 1PH, 3,450 RPM - 3 "V" BELT DRIVE (INCLUDES 6' GROUNDED POWER CORD, PLUG NOT INCLUDED).
ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. CUTTERHEAD - 2.895 DIA., 5,090 RPM, 15,270 CPM.
KNIVES - (3) HIGH SPEED STEEL, 15" X 1" X 1/8" EA.
MAXIMUM CUT DEPTH - 3/32.
CAPACITY - MAXIMUM 14-7/8" WIDE X 6-1/2" THICK; MINIMUM 7" LONG.
FEED SPEEDS - 16 FPM OR 20 FPM.
FEED ROLLERS - (2) 1.97" DIA.
TABLE - 14-7/8" X 19-7/8".
DUST PORT - 4" DIA.
OVERALL DIMENSIONS - 50-3/4"H X 29"W X 26-1/4"D.
NET WEIGHT - 375 LBS.
SHIPPING WEIGHT - 411 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery Accessories - Jointers & Planers
|
WIXEY™DIGITAL PLANER-CUT DEPTH GAUGE OFFERS AN ULTRA-ACCURATE ALTERNATIVE TO CLUMSY CALIPERS
|
| Digital Planer Readout
|
THIS UNIQUE ELECTRONIC PLANER GAUGE DISPLAYS YOUR EXACT CUTTING DEPTH, IN DECIMALS WITH FRACTIONS, OR IN MILLIMETERS, WITH ABSOLUTE PRECISION:
ENDS THE GUESSWORK AND CONTINUAL CHECKING OF PLANER STOCK DEPTH WITH CALIPERS. MOUNTS IN MINUTES RIGHT ONTO YOUR PORTABLE PLANERS STOCK HEIGHT GAUGE. LARGE LED READOUT IS ACCURATE TO 1/32" IN FRACTIONS (.005" DECIMAL) AND DOWN TO 0.1 MM IN METRIC. MEASURES CUTS UP TO 6" HIGH. MOUNTS TO DEWALT®, DELTA®, RIDGID®, RYOBI®, MAKITA®, CRAFTSMAN AND OTHER PORTABLE PLANERS.
|
|
|
|
Machinery Accessories - Jointers & Planers
|
DELTA® PORTABLE PLANERS ARE LOADED WITH FEATURES
|
| 13" Knives For Delta 22-580
...plus other(s)
|
|
|
|
Machinery Accessories - Jointers & Planers
|
DELTA 15" X 6.5" PLANER HAS IMPROVED STAND AND ROLLERS
|
| 15-1/8" Planer Knives
...plus other(s)
|
|
POWERFUL 3HP 230V MOTOR GIVES 15,000 CUTS PER MINUTE FOR EXTRA-SMOOTH PLANING. THE PRECISION GROUND CAST IRON TABLE WON'T MAR OR SNIPE AND ALLOWS FOR EASY FEEDING. THE CUTTERHEAD MOVES UP AND DOWN ON FOUR POSTS AND THE TABLE REMAINS STATIONARY. A HANDY CONTROL LEVER ALLOWS INSTANT FEED SPEED CHANGES. OUTFEED ROLLER IS POLYURETHANE TO ELIMINATE MARKING OF PLANED STOCK. INFEED AND OUTFEED TABLES ARE INCLUDED AS SHOWN. KNIVES USE JACK-SCREW ARRANGEMENTS FOR EASY ADJUSTING OR REPLACING. 20-1/2"L X 28"W X 48"H. WEIGHS 340 LBS. USA.
|
|
|
|
Machinery Accessories - Jointers & Planers
|
DELTA® JOINTER PALTM MAGNETIC KNIFE SETTING JIG MAKES A TOUGH JOB EASY
|
| Magna-set Jointer Knife Jig
|
DELTA® JOINTER-PALTM MAGNETIC KNIFE SETTING JIG HOLDS KNIVES TO THE HEIGHT OF THE OUTFEED TABLE SURFACE (+/- .002") FOR FAST, ACCURATE JOINTER KNIFE REPLACEMENT. CAN BE USED WITH 6", 8", OR 12" JOINTERS. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Jointers & Planers
|
ADD A DISCONTINUED STEEL STAND WITH EXTENSION SHELVES TO YOUR DELTA® PLANER AND SAVE
|
| Planer Stand W/2 Extension Shelves
|
ORIGINALLY DESIGNED AS AN ACCESSORY SET FOR MODEL DC-33 13" AND DC-380 15" PLANERS, THE DELTA® MODEL 50-655 STEEL STAND WITH EXTENSION SHELVES CAN BE ADAPTED FOR USE WITH ALMOST ANY CURRENT OR EARLIER MODEL DELTA® PLANER (PLANER NOT INCLUDED):
SET INCLUDES STEEL STAND WITH FOUR LEGS AND BRACES, 14-1/2"W X 19"L FOLDING INFEED AND OUTFEED SHELVES (LAMINATED SHELVES DO NOT HAVE ROLLERS), HINGES, TIE BARS, MOUNTING HARDWARE AND INSTRUCTIONS. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
symbol next to the category that matches your desired product and select a sub-category link.
