|
|
|
Adhesives - Water Based
|
TITEBOND® DARK WOOD GLUE IS MADE FOR DARKER WOOD
|
| 16 Oz Titebond Ii Dark
...plus other(s)
|
TITEBOND® DARK WOOD GLUE IS A DYED VERSION OF ORIGINAL WOOD GLUE:
DARKER COLOR HELPS MAKE GLUE JOINTS IN DARK WOOD SUCH AS WALNUT LESS VISIBLE. ASSEMBLY TIME: 5 MINUTES. SET TIME: 12 HOURS. USA.
|
|
|
|
Adhesives - Water Based
|
FIX LOOSE FURNITURE JOINTS WITH CHAIR-LOC®
|
| Chair-loc
|
NOT A GLUE, CHAIR-LOC® IS A SYNTHETIC PRODUCT THAT PENETRATES WOOD FIBERS, MAKING THEM SWELL TO TIGHTLY LOCK WOODEN JOINTS IN PLACE:
FIXES LOOSE CHAIRS AND LOCKS RUNGS, LEGS, BROOM HANDLES, GARDEN TOOLS, LADDERS, DOWELS AND MORE. THREE OZ. PLASTIC SQUEEZE BOTTLE WITH APPLICATOR NOZZLE. EASY SOAP AND WATER CLEAN UP. BUY SEVERAL SO THEY'RE ON HAND WHEN YOU NEED THEM.
|
|
|
|
Adhesives - Water Based
|
FINALLY, A PVA WOOD GLUE THAT BONDS STRONGER THAN MOST WOOD AND HELPS FILL GAPS
|
| Critical Bond Ii
...plus other(s)
|
CRITICAL BOND II™ WOODWORKER'S GAP FILLING PVA GLUE IS A POLYVINYL ACETATE EMULSION ADHESIVE THAT CREATES A SUPER STRONG BOND FOR INTERIOR WOODWORK AND WORKS GREAT WITH ALMOST ANY SOFT WOOD AND HARDWOOD:
HIGH SOLIDS' CONTENT ENSURES SUPERIOR GAP FILLING, MANY TIMES ELIMINATING THE NEED FOR WOOD FILLER. NATURAL WOOD TONE COLOR HELPS GLUE JOINTS BLEND IN. NON-STAINING FORMULA HELPS PREVENT GLUE SPOTS ON YOUR WOOD, WHICH CAN CAUSE PROBLEMS WHEN APPLYING COLORED STAINS OR DYES. 10-20 MINUTE OPEN TIME; 30-90 MINUTE CLAMP TIME. NON-TOXIC AND NON-FLAMMABLE. WARM WATER CLEAN UP WHEN GLUE IS WET. CANADA.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® COLD PRESS FOR VENEER
|
| Cold Press For Veneer Glue
...plus other(s)
|
TITEBOND® COLD PRESS FOR VENEER HAS BEEN SPECIFICALLY FORMULATED FOR LARGE SCALE BONDING OF VENEERS TO FLAT SURFACES. YOU CAN USE IT FOR COLD PRESS LAMINATING OF WOOD TO SOLID WOOD, PARTICLEBOARD, MDF, PLYWOOD OR OTHER POROUS MATERIALS:
MODERATE SET SPEED (15 MINUTE ASSEMBLY TIME AFTER APPLICATION), LEAVES A TRANSLUCENT GLUE LINE AND PRODUCES NO HARMFUL OR CORROSIVE FUMES. PREVENTS BLEED THROUGH ON OPEN GRAIN AND UNBACKED WOOD VENEERS. CLEANS UP WITH WATER WHEN GLUE IS WET. FOR CONSISTENT COVERAGE A MECHANICAL SPREADER IS RECOMMENDED. USA.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® ORIGINAL FLUORESCENT WOOD GLUE
|
| Titebond Flourescent Glue-qt
...plus other(s)
|
TITEBOND® ORIGINAL FLUORESCENT GLUE BONDS STRONGER THAN WOOD, OFFERS EXCELLENT SANDABILITY AND IS UNAFFECTED BY FINISHES - 5 MINUTE ASSEMBLY TIME FOLLOWING APPLICATION:
STRONG INITIAL TACK AND FAST SET SPEED SHORTEN CLAMP TIME. BONDS WOOD, HARDBOARD, LAMINATES AND PARTICLE BOARD. CLEAN UP WITH WATER; SCRAPE OFF DRIED EXCESS. AVAILABLE IN QUART AND 5 GALLON CONTAINERS. NOTE: BLACK LIGHT NOT INCLUDED. USA
|
|
|
|
Adhesives - Water Based
|
TITEBOND® WHITE GLUE
|
| Titebond White Glue-gallon
...plus other(s)
|
IDEAL FOR GENERAL WOODWORKING, TITEBOND® WHITE GLUE PRODUCES A TRANSLUCENT GLUE LINE, OFFERS EXCELLENT SANDABILITY AND IS UNAFFECTED BY FINISHES - 5 MINUTE ASSEMBLY TIME FOLLOWING APPLICATION:
STRONG INITIAL TACK AND FAST SET SPEED SHORTEN CLAMP TIME. BONDS MOST POROUS AND SEMI-POROUS MATERIALS. CLEAN UP WITH WATER; SCRAPE OFF DRIED EXCESS. AVAILABLE IN GALLON AND 5 GALLON CONTAINERS. USA
|
|
|
|
Adhesives - Water Based
|
SUPER TITEBOND® WOOD GLUE
|
| Super Titebond-5 Gal
|
AN EXCELLENT CHOICE FOR EDGE AND FACE GLUING, PROFESSIONAL GRADE SUPER TITEBOND® WOOD GLUE OFFERS SUPERIOR SANDABILITY AND SOLVENT RESISTANCE - 5 MINUTE ASSEMBLY TIME FOLLOWING APPLICATION:
BONDS STRONGER THAN WOOD AND PROVIDES A LONGER WORKING TIME THAN TRADITIONAL ALIPHATIC RESIN GLUES. CLEAN UP WITH WATER; SCRAPE OFF DRIED EXCESS. 5 GALLON CONTAINERS. USA
|
|
|
|
Adhesives - Water Based
|
TITEBOND® DOWELING GLUE L.V. IS FOR USE WITH AUTOMATIC DOWELING EQUIPMENT
|
| Doweling Glue L.v.-5gal
|
ITS LOW VISCOSITY (140 CPS) ALLOWS THE APPROPRIATE FLOW THROUGH THE NARROW FEED LINES AND INJECTORS OF EUROPEAN-MADE DOWELING MACHINERY:
SETS FAST TO REDUCE ASSEMBLY TIME, OFFERS EXCELLENT STRENGTH AND PROVIDES A TRANSLUCENT GLUE LINE. FORMULATED FOR USE ON SOLID WOODS, PARTICLEBOARD, MDF, PLYWOOD AND OTHER POROUS MATERIALS. USA.
|
|
|
|
Adhesives - Water Based
|
LEICHTUNG WORK SHOPS® SUPER-STRONG, SPEED SET WOOD GLUE
|
| Speed Set Wood Glue 16 Oz.
|
LEICHTUNG WORK SHOPS® SPEED SET WOOD GLUE SETS IN JUST 20 MINUTES, THEN CURES IN ONLY TWO HOURS TO A BOND STRONGER THAN THE WOOD ITSELF (3,250 PSI):
DRIES CLEAR, SO IT'S GREAT FOR CABINETMAKING OR LAMINATES. RESISTS ALL PAINTS AND FINISHES AND SANDS EASILY - USE FOR EDGE GLUING, ASSEMBLY GLUING, VENEERING, CABINET MAKING - ANY JOB YOU DON'T WANT TO CLAMP FOR MORE THAN 20 MINUTES. NON-TOXIC. HANDY 16 OZ. SQUEEZE BOTTLE.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Adhesives - Water Based
|
PREMIUM TITEBOND® GLUES FOR ALMOST ANY WOODWORKING APPLICATION
|
| Quart Original Titebond
...plus other(s)
|
TITEBOND® ADHESIVES SPREAD EASILY, ARE NON-TOXIC AND SOLVENT-FREE AND FORM SANDABLE, PAINTABLE AND EXTREMELY DURABLE BONDS WITH VIRTUALLY ANY POROUS OR SEMI-POROUS SURFACE - CLEAN UP WITH WATER:
TITEBOND® ORIGINAL WOOD GLUE IS THE INDUSTRY STANDARD FOR WOODWORKING:
STRONG INITIAL TACK AND FAST SET-SPEED REDUCE CLAMP TIME - DEVELOPS A BOND STRONGER THAN THE WOOD. IDEAL FOR WOOD, HARDBOARD, PARTICLEBOARD, LEATHER AND CLOTH. NOT INTENDED FOR EXTERIOR USE OR WHERE MOISTURE IS LIKELY. AVAILABLE IN PINTS, QUARTS, GALLONS AND 5-GALLON PAILS. ASSEMBLY TIME: 5 MINUTES. SET TIME: 12 HOURS.
TITEBOND® DARK WOOD GLUE IS A DYED VERSION OF ORIGINAL WOOD GLUE:
AVAILABLE IN PINTS AND GALLONS. ASSEMBLY TIME: 5 MINUTES. SET TIME: 12 HOURS.
TITEBOND® EXTEND WOOD GLUE IS A SLOWER-SETTING VERSION OF ORIGINAL WOOD GLUE:
SUPERIOR PERFORMANCE IN A BROAD RANGE OF APPLICATIONS, INCLUDING EDGE AND FACE GLUING - PARTICULARLY USEFUL IN COMPLEX OPERATIONS SUCH AS CURVED RAILINGS AND OTHER ASSEMBLIES THAT REQUIRE MORE TIME TO ALIGN. AVAILABLE IN PINTS AND GALLONS. ASSEMBLY TIME: 15 MINUTES. SET TIME: 24 HOURS. SIMILAR TO EXTEND WOOD GLUE, TITEBOND® II EXTEND WOOD GLUE CAN BE USED FOR EXTERIOR APPLICATIONS (ALSO AVAILABLE IN PINTS AND GALLONS).
TITEBOND® LIQUID HIDE GLUE SLOW SET-SPEED PERMITS PRECISE ASSEMBLY OF PARTS:
READY-TO-USE - MIXING, HEATING OR STIRRING NOT REQUIRED. RECOMMENDED FOR CANING PROJECTS - ALSO GREAT FOR CREATING CRACKLE FINISHES. NOT INTENDED FOR EXTERIOR USE OR WHERE MOISTURE IS LIKELY. AVAILABLE IN 4 OZ., 8 OZ. AND QUART CONTAINERS. ASSEMBLY TIME: 10 MINUTES. SET TIME: 12 HOURS.
TITEBOND® MELAMINE GLUE IS DESIGNED FOR BONDING WOOD, PARTICLE BOARD AND MDF TO SYNTHETIC MATERIALS SUCH AS MELAMINE, VINYL AND HPL AS WELL AS METALS:
FAST INITIAL TACK, YET HAS A LONGER OPEN TIME THAT ALLOWS FOR ACCURATE ALIGNMENT. THICKER FORMULATION - FEWER RUNS AND DRIPS. AVAILABLE IN PINTS AND GALLONS. ASSEMBLY TIME: 10-15 MINUTES. SET TIME: 12 HOURS.
TITEBOND® II PREMIUM WOOD GLUE IS IDEAL FOR EXTERIOR WOODWORKING PROJECTS, INCLUDING FURNITURE, BIRDHOUSES, MAILBOXES, PLANTERS AND PICNIC TABLES:
SO WATER RESISTANT, IT'S THE ONLY ONE-PART GLUE TO PASS ANSI/HPVA TYPE II WATER-RESISTANCE SPECIFICATIONS (NOT INTENDED FOR CONTINUOUS SUBMERSION). STRONG INITIAL TACK, FAST SET-SPEED, SUPERIOR STRENGTH AND EXCELLENT SANDABILITY. FDA APPROVED FOR INDIRECT FOOD CONTACT (CUTTING BOARDS) AND IDEAL FOR HOT PRESS AND RADIO FREQUENCY GLUING SYSTEMS. AVAILABLE IN PINTS, QUARTS, GALLONS AND 5-GALLON PAILS. ASSEMBLY TIME: 5 MINUTES. SET TIME: 24 HOURS.
TITEBOND® III ULTIMATE WOOD GLUE IS THE FIRST, ONE-PART, WOOD GLUE PROVEN WATERPROOF - PASSES ANSI/HPVA TYPE I WATER-RESISTANCE SPECIFICATIONS AND OFFERS SUPERIOR BOND STRENGTH, LONGER OPEN ASSEMBLY TIME AND LOWER APPLICATION TEMPERATURE (NOT INTENDED FOR CONTINUOUS SUBMERSION):
THE ULTIMATE IN WOOD GLUES - IDEAL FOR BOTH INTERIOR AND EXTERIOR APPLICATIONS. STRONG INITIAL TACK, SANDS EASILY WITHOUT SOFTENING AND FDA APPROVED FOR INDIRECT FOOD CONTACT (CUTTING BOARDS). USE AS AN ECONOMICAL SUBSTITUTE FOR POLYURETHANE WHEN GLUING UP MOST EXTERIOR WOOD - SAFER TO USE THAN TRADITIONAL WATERPROOF WOOD GLUES. AVAILABLE IN PINTS, QUARTS AND GALLONS. ASSEMBLY TIME: 8 MINUTES. SET TIME: 12 HOURS.
TITEBOND® WOOD MOLDING GLUE IS WELL-SUITED FOR APPLYING WINDOW CASINGS, FINISH TRIM, BASEBOARDS AND CROWN MOLDING:
STRONG INITIAL TACK, LONGER WORKING TIME. THICK AND FAST DRYING. INTERIOR APPLICATIONS - FOR EXTERIORS, USE TITEBOND® III ULTIMATE WOOD GLUE. AVAILABLE IN PINTS. ASSEMBLY TIME: 3-5 MINUTES. SET TIME: 24 HOURS.
ALL GLUES COVER APPROXIMATELY 200-250 SQ. FT. PER GALLON. NOTE: WHEN GLUING SOFT WOODS, 100-150 PSI CLAMPING PRESSURE IS RECOMMENDED - 175-250 PSI FOR HARDWOODS.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® LIQUID HIDE GLUE
|
| Liquid Hide Glue 16oz.
...plus other(s)
|
|
SLOW SET SPEED PERMITS PRECISE ASSEMBLY OF PARTS. GREAT FOR CREATING CRACKLE FINISHES AND FINE FURNITURE REPAIR. TITEBOND® LIQUID HIDE GLUE IS ALSO THE RECOMMENDED GLUE FOR CANING PROJECTS.
|
|
|
|
Adhesives - Water Based
|
OL' YELLER™...CABINET MAKER'S YELLOW GLUE
|
| Ol'yeller Regular-1 Gallon
...plus other(s)
|
OL' YELLER™ REGULAR COMPARES FAVORABLY WITH OTHER YELLOW GLUES IN PERFORMANCE - BUT COSTS A LOT LESS!
INDUSTRIAL GRADE ALIPHATIC PVA ADHESIVE FROM WOODWORKER'S SUPPLY® CREATES A BOND STRONGER THAN MOST WOOD SPECIES. TYPICAL BONDING APPLICATIONS INCLUDE CABINETS, FURNITURE, INTERIOR DOORS, TRIM, PLYWOOD, EDGEBONDING, PANEL-TO-FRAME, GENERAL WOOD ASSEMBLY AND COUNTERTOPS. RECOMMENDED FOR BONDING HIGH PRESSURE LAMINATE (HPL) TO WOOD OR WOOD-BASED SUBSTRATES. HARD BOND LINES HAVE GOOD SANDING PROPERTIES. NON-FLAMMABLE, NON-HAZARDOUS, NON-STAINING AND EASY TO CLEAN-UP WITH WATER WHILE WET. USA.
|
|
|
|
Adhesives - Water Based
|
OL' YELLER™...WATER RESISTANT PVA GLUE
|
| Ol'yeller Waterdog
...plus other(s)
|
OL' YELLER™ WATER DOG IS AN INDUSTRIAL, WATER RESISTANT TYPE II PVA GLUE THAT STANDS UP TO THE BEST GLUES ON THE MARKET IN SHEAR (BOND STRENGTH PSI) AND WOOD FAILURE RATE TESTS BUT COSTS LESS:
INDUSTRIAL GRADE CROSSLINKING ALIPHATIC ADHESIVE FROM WOODWORKER'S SUPPLY® COMBINES THE CONVENIENCE OF A READY-TO-USE GLUE. PROVIDES TYPE II WATER RESISTANCE AND CREATES A BOND STRONGER THAN MOST WOOD SPECIES. TYPICAL BONDING APPLICATIONS INCLUDE INTERIOR/EXTERIOR DOORS, TRIM, PLYWOOD, EDGEBONDING, PANEL-TO-FRAME, GENERAL WOOD ASSEMBLY AND COUNTERTOPS. RECOMMENDED FOR BONDING HIGH PRESSURE LAMINATE (HPL) TO WOOD OR WOOD-BASED SUBSTRATES. HARD BOND LINES HAVE GOOD SANDING PROPERTIES. NON-FLAMMABLE, NON-HAZARDOUS, NON-STAINING AND EASY TO CLEAN-UP WITH WATER WHILE WET. USA.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® WOOD MOLDING GLUE IS SPECIFICALLY FORMULATED FOR TRIM
|
| Franklin Wood Molding Glue
|
TITEBOND® WOOD MOLDING GLUE IS THE THICKEST, FASTEST DRYING GLUE AVAILABLE FOR POROUS AND SEMI-POROUS MATERIALS. IDEAL FOR FOR FINISH TRIM, CROWN MOLDING, BASEBOARDS, WINDOW CASINGS AND SIMILAR APPLICATIONS:
EXTRA THICK FORMULA HELPS FILL SMALL CRACKS AND GAPS. STRONG INITIAL TACK AND FAST SET SPEED (3-5 MINUTE ASSEMBLY TIME AFTER APPLICATION), YET ALLOWS REALIGNMENT OF WORKING PIECES; BOND STRONGER THAN THE WOOD ITSELF. EXCELLENT SANDABILITY; UNAFFECTED BY FINISHES. CLEANS UP WITH WATER. NOT INTENDED FOR EXTERIOR USE OR WHERE MOISTURE IS LIKELY. USA
|
|
|
|
Adhesives - Water Based
|
TITEBOND® MELAMINE GLUE BONDS WOOD AND SHEET GOODS DIRECTLY TO MELAMINE
|
| Titebond Melamine 5gal
...plus other(s)
|
TITEBOND® MELAMINE GLUE HAS BEEN FORMULATED FOR BONDING WOOD, PARTICLEBOARD, MDF AND OTHER POROUS SUBSTRATES TO SYNTHETIC MATERIALS SUCH AS MELAMINE, VINYL AND HPL AS WELL AS METALS:
WATER BASED, NONFLAMMABLE, LOW ODOR AND DRIES CLEAR. THICKER FORMULATION OFFERS FEWER RUNS AND DRIPS, MAKING IT EASIER TO USE AND MORE EFFECTIVE FOR PRECISE ASSEMBLIES. FAST INITIAL TACK, YET A LONGER OPEN TIME ALLOWS FOR ACCURATE ALIGNMENT OF WORKING MATERIALS (10-15 MINUTE ASSEMBLY TIME AFTER APPLICATION; 12 HOUR SET TIME). CLEANS UP WITH WATER. NOTE: NOT INTENDED FOR EXTERIOR USE OR WHERE MOISTURE IS LIKELY. USA.
|
|
|
|
Adhesives - Water Based
|
OL' YELLER™...QUICK SET CABINET MAKER'S YELLOW GLUE
|
| Ol Yeller Quickset
...plus other(s)
|
OL' YELLER™ QUICK SET COMPARES FAVORABLY WITH SIMILAR GLUES IN PERFORMANCE - BUT COSTS A LOT LESS!
INDUSTRIAL GRADE ALIPHATIC PVA ADHESIVE FROM WOODWORKER'S SUPPLY® CREATES A BOND STRONGER THAN MOST WOOD SPECIES. CLAMP TIME CAN BE AS SHORT AS 15 MINUTES BUT VARIES DUE TO HUMIDITY AND TEMPERATURE (A TEST PANEL IS SUGGESTED FOR CLAMP TIMES OF LESS THAN ONE HOUR). TYPICAL BONDING APPLICATIONS INCLUDE CABINETS, FURNITURE, INTERIOR DOORS, TRIM, PLYWOOD, PANEL-TO-FRAME, GENERAL WOOD ASSEMBLY AND COUNTERTOPS. RECOMMENDED FOR EDGEBONDING AND MITER-FOLD (V-GROOVE) JOINTS. HARD BOND LINES HAVE GOOD SANDING PROPERTIES. NON-FLAMMABLE, NON-HAZARDOUS, NON-STAINING AND EASY TO CLEAN-UP WITH WATER WHILE WET. USA.
|
|
|
|
Adhesives - Water Based
|
OL' YELLER™...NON-SAG PVA TRIM AND MOLDING GLUE
|
| Ol Yeller Nsg Glue
|
OL' YELLER™ NON SAG GLUE COMPARES FAVORABLY WITH SIMILAR GLUES IN PERFORMANCE - BUT COSTS A LOT LESS!
INDUSTRIAL GRADE ALIPHATIC PVA WOODWORKING ADHESIVE FROM WOODWORKER'S SUPPLY® CREATES A BOND STRONGER THAN MOST WOOD SPECIES. ESPECIALLY RECOMMENDED FOR VERTICAL GLUING APPLICATIONS. HARD BOND LINES HAVE GOOD SANDING PROPERTIES. NON-FLAMMABLE, NON-HAZARDOUS, NON-STAINING AND EASY TO CLEAN-UP WITH WATER WHILE WET. USA.
|
|
|
|
Project Supplies - Canes & Clubs
|
TRADITIONAL HARNESS TIPS MAKE GREAT WALKING STICK HANDLES
|
| Pear Shaped Ball Tip Solid Brass
...plus other(s)
|
A TRADITIONAL HARNESS TIP WITH A BRASS, CHROME OR STAINLESS STEEL FINISH WILL ADD A DISTINCTIVE TOUCH TO YOUR FAVORITE, HANDMADE WALKING STICK:
PEAR SHAPED TIPS HAVE 11/16" I.D. HOLES, WEIGH ABOUT 4 OZ., AND ARE 2-1/8" DIA. ROUND BALLS WEIGH 7-1/2 OZ. WITH A 3/4" I.D. HOLE. HAME TIPS ARE 7"L; MINTO HAME TIPS HAVE 1-5/8" ROUND BALL; FAVORITE HAME TIPS END WITH 2-1/8" OVALS. BOTH HAVE 1-1/8" I.D. HOLES X 1-5/16" SHANKS.
|
|
|
|
Project Supplies - Clock Components
|
4-3/8" CLOCK FITUPS
|
| Ivory Arabic Quartz Fitup 4-3/8"
...plus other(s)
|
THESE 4-3/8" CLOCK FITUPS FEATURE TOP QUALITY COMPONENTS INCLUDING A WEST GERMAN QUARTZ MOVEMENT, SOLID BRASS DIAMOND CUT BEZEL AND MINERAL GLASS LENS:
AVAILABLE WITH WHITE OR IVORY ARABIC, ROMAN OR FANCY ARABIC OR GOLD ARABIC OR ROMAN FACES. FIT INTO 2-3/8" DIA. X 1/2" DEEP HOLE USING METAL SPRING CLIP MOUNTING MECHANISM - PROTRUDE 7/8". OPERATE ON ONE "N" CELL BATTERY (ORDER SEPARATELY).
|
|
|
|
Project Supplies - Clock Components
|
ELEGANT MINI CLOCK MOVEMENTS HAVE CLASSIC ROMAN NUMERAL FACES
|
| Roman Mini Clock Movement
|
QUARTZ MINI CLOCK MOVEMENTS LET YOU ADD A FULLY FUNCTIONING TIMEPIECE TO JUST ABOUT ANY PROJECT YOU DECIDE UPON:
BRASS PLATED BEZEL - MINI CLOCK PRESS FITS INTO 1-3/8" DIA. HOLE (FORSTNER BIT RECOMMENDED). NOTE: MODEL 377 OR SR626SW 1.55V SILVER OXIDE WATCH BATTERY REQUIRED. JAPAN.
LIMITED TO QUANTITIES ON HAND
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® 1-9/16" HSS FORSTNER BIT - 828-937.
|
|
|
|
Project Supplies - Clock Components
|
8-1/2" DIAMETER QUARTZ CLOCK IS DESIGNED TO "DROP IN" TO YOUR PROJECT
|
| 8-1/2" Dia Quartz Drop-in Clock
|
THIS DISTINCTIVE 8-1/2" DIA. QUARTZ CLOCK CAN BE INSTALLED INTO A CLOCK BODY OR OTHER PROJECT THAT YOU HAVE BUILT:
SIMPLY CUT A 7-15/16" DIA. HOLE, POSITION THE CLOCK AND BEZEL ASSEMBLY, THEN PLACE THE LARGE RUBBER BAND (INCLUDED) AROUND THE INSIDE OF THE HOLE TO KEEP THE CLOCK FROM SHIFTING. FEATURES MINUTE, HOUR AND SECOND HANDS. ARABIC NUMERAL FACE, BRASS-COLOR TRIM AND PLASTIC BEZEL. REQUIRES 1.5V BATTERY (NOT INCLUDED). CAN ALSO BE HUNG BY ITSELF USING BUILT-IN HANGING HOLE. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Project Supplies - Clock Components
|
TIMEPLATE™ TEMPLATE MAKES CLOCK FACE LAYOUTS EASY
|
| Clock Face Template
|
TIMEPLATE™ TEMPLATE OFFERS MANY ADVANTAGES OVER OTHER METHODS OF CLOCK FACE MARKER PLACEMENT:
FLEXIBLE, TRANSPARENT PLASTIC - DESIGNED FOR LONG LIFE - IT LETS YOU SEE EXACTLY WHERE MARKERS WILL BE PLACED. 9-7/8" SQUARE - CAN BE USED TO LAY OUT CLOCK FACES 2" TO 9-1/2" DIAMETER IN 1/2" INCREMENTS. VERY EASY TO USE; SIMPLY LAY IT OVER THE CLOCK FACE AND PENCIL IN YOUR MARKS. INSTRUCTIONS INCLUDED. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Project Supplies - Clock Components
|
QUARTZ CLOCK MOVEMENTS
|
| Quartz Movement For 1/8"th Face
...plus other(s)
|
EACH QUARTZ CLOCK MOVEMENT USES ONE AA BATTERY (NOT INCLUDED), HAS A 5/16" DIAMETER BRASS SHAFT, HANGER, REAR SET KNOB AND QUARTZ CRYSTAL:
2-1/8" SQUARE X 1/2"D CASE. SHAFT LENGTHS ACCOMMODATE DIFFERENT CLOCK FACE THICKNESSES. HANDS SOLD SEPARATELY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
858-390 - HANDS FOR CLOCK MOVEMENTS.
|
|
|
|
Project Supplies - Clock Components
|
MINI CLOCK FIT-UPS
|
| Mini Clock Insert (roman Numerals)
...plus other(s)
|
THESE MINI QUARTZ CLOCK FIT-UP INSERTS ALLOW YOU TO PLACE TIME IN SMALL DESK SETS OR IN TABLE CLOCKS WHERE A TOUCH OF CLASS IS IMPORTANT:
BRASS-COLOR RIMS AND BLACK HANDS. CHOOSE BETWEEN ARABIC NUMERALS WITH A SECOND HAND OR ROMAN NUMBERS WITHOUT A SECOND HAND. 1-7/16" OUTER DIAMETER BEZEL REQUIRES A 1-3/8" X 1/4" DEEP OPENING. IMPORTED.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Project Supplies - Clock Components
|
CREATE YOUR OWN CLOCK FACE WITH RAISED NUMERALS/MARKERS
|
| 5/8" Arabic Clock Numerals
|
DURABLE STYRENE NUMERAL AND DOT SETS WILL CUSTOMIZE JUST ABOUT ANY CLOCK FACE:
PEEL AND STICK BACKING MAKES INSTALLATION SIMPLE. BRASS FINISH CAN BE PAINTED ANY COLOR YOU CHOOSE. IMPORTED.
|
|
|
|
Project Supplies - Clock Components
|
CUSTOMIZE YOUR CLOCK PROJECTS WITH TRADITIONAL OR MODERN HOUR, MINUTE AND SECOND HANDS
|
| Black Serpentine Clock Hand Set
...plus other(s)
|
SELECT A CLOCK STYLE, THEN PICK THE HANDS TO MATCH. AVAILABLE IN BLACK OR BRASS, HOUR AND MINUTE HANDS FOR CLOCK MOVEMENTS COME IN SCHOOL HOUSE, SERPENTINE, TRADITIONAL AND MODERN STYLES:
HOUR HANDS RANGE FROM 2-1/2" TO 3-1/8" LONG. MINUTE HANDS ARE 3-1/8" TO 3-3/4" LONG. SECOND HANDS (AVAILABLE IN BLACK, RED OR GOLD) ARE FROM 2-3/4" TO 3-1/8" LONG.
|
|
|
|
Project Supplies - Clock Components
|
CLASSIC DESIGN CLOCK KITS CAN TURN INTO WONDERFUL GIFTS
|
| Winstead Desk/shelf Clock Kit
...plus other(s)
|
HEIRLOOM QUALITY CLASSIC DESIGN CLOCKS ARE AT HOME ON MANTLES, BOOKCASES AND DESKS. EACH DESIGN FEATURES A SOLID CHERRY BODY AND BASE PLUS ACCURATE QUARTZ MOVEMENT:
PRE-SANDED; READY TO BE GLUED, ASSEMBLED AND FINISHED - 6-1/4"H X 5"W X 2"D, WHEN COMPLETED. 3-1/8" DIA. IVORY CLOCK FACE IS EMBOSSED WITH ROMAN NUMERALS AND SEALED BEHIND A CONVEX GLASS CRYSTAL (HOUR, MINUTE AND SECOND HANDS, BRASS FINISH BEZEL, REQUIRED PARTS AND INSTRUCTIONS INCLUDED). REQUIRES ONE "AA" BATTERY (NOT INCLUDED). 917-823 - WINSTEAD CLOCK (NOT SHOWN) IS SIMILAR TO GEORGETOWN CLOCK BUT HAS A ROUNDED TOP. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Project Supplies - Clock Components
|
1-7/16" ARABIC CLOCK FITUPS INTENDED FOR SMALLER PROJECTS
|
| 1 7/16" White Arabic Fitup
...plus other(s)
|
SMALL 1-7/16" CLOCK FITUPS HAVE 12-HOUR ARABIC NUMERAL FACES, AVAILABLE IN WHITE OR IVORY:
FIT INTO 1-3/8" HOLES. BATTERY INCLUDED.
|
|
|
|
Project Supplies - Clock Components
|
1-7/16" ROMAN CLOCK FITUPS
|
| 1 7/16" Ivory Roman Fitup
...plus other(s)
|
|
1-7/16" ROMAN CLOCK FITUPS FIT 1-3/8" DIAMETER X 1/4" DEEP HOLE. WHITE OR IVORY FACES WITH BRASS OR CHROME BEZELS; SECOND SWEEP HAND. BATTERY INCLUDED.
|
|
|
|
Project Supplies - Clock Components
|
1-7/16" SPECIALTY CLOCK FITUPS
|
| 1 7/16" Gun Metal Fitup
...plus other(s)
|
SPECIALITY CLOCK FITUPS ARE AVAILABLE IN 24 HOUR, BLANK GUN METAL, LCD AND MOON PHASE DIALS:
1-7/16" DIA. FACES. FIT 1-3/8" HOLE; 1/4" DEPTH. BATTERIES INCLUDED.
|
|
|
|
Project Supplies - Clock Components
|
7/8" SOLID BRASS MICRO CLOCK FITUPS
|
| 7/8" Micro Mini Brass Fitup
...plus other(s)
|
|
SOLID BRASS MICRO CLOCK FITUP FITS INTO 25/32" DIAMETER X 9/32" DEEP HOLE. WHITE FACE; ARABIC OR ROMAN NUMERALS; SECOND SWEEP HAND. BATTERY INCLUDED.
|
|
|
|
Project Supplies - Clock Components
|
2" PREMIUM CLOCK INSERTS FOR YOUR PROJECTS
|
| 2"solid Brass/gold Dial
...plus other(s)
|
2" PREMIUM CLOCK INSERTS FEATURE HIGHLY ACCURATE QUARTZ MOVEMENTS WITH SECOND SWEEP HANDS:
SOLID BRASS BODIES WITH STAINLESS STEEL BACKS AND MINERAL GLASS LENSES. EACH FITS INTO A 1/4" DEEP X 1-3/8" DIAMETER HOLE. JAPAN.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Project Supplies - Clock Components
|
SECOND HANDS FOR CLOCK MOVEMENTS
|
| 1 1/8" Black Sweep
...plus other(s)
|
|
AVAILABLE IN BLACK, RED AND GOLD, SECOND HANDS FOR CLOCK MOVEMENTS ADD AN ADDITIONAL DEGREE OF ACCURACY TO CLOCK PROJECTS. 1-1/8" TO 3-1/2" LENGTHS ADAPT TO ALMOST ANY TIMEPIECE.
|
|
|
|
Project Supplies - Clock Components
|
3-1/2" CLOCK FITUPS
|
| White Arabic Quartz Fitup 3-1/2"
...plus other(s)
|
|
SIX STYLISH WHITE, GOLD, CHROME OR BLACK CLOCK FACES WITH ROMAN OR ARABIC NUMERALS. ALL INCLUDE SWEEP SECOND HAND. FIT INTO A 3" DIA. HOLE, 11/16" DEEP. USE AA BATTERY, NOT INCLUDED.
|
|
|
|
Project Supplies - Clock Components
|
2-3/4" CLOCK FITUPS
|
| 2 3/4" Quartz Fitup
...plus other(s)
|
|
2-3/4" CLOCK FITUPS ARE AVAILABLE WITH REGULAR OR DECORATIVE ARABIC OR ROMAN FACES. DIAMOND CUT METAL BEZEL; SECOND SWEEP HAND; 11/16" DEPTH. USE ONE AAA BATTERY (NOT INCLUDED). THREE YEAR GUARANTEE. USA.
|
|
|
|
Project Supplies - Clock Components
|
PREMIUM 2-3/4" CLOCK FITUPS
|
| Roman Fitup Brass/glass 2-3/4"
...plus other(s)
|
PREMIUM 2-3/4" CLOCK FITUPS FEATURE SOLID BRASS BEZELS WITH CURVED MINERAL GLASS LENSES:
ROMAN FACE FITUP HAS IVORY COLOR FACE; ARABIC VERSION HAS WHITE FACE. EACH FITS INTO A 2-3/8" X 11/16" HOLE. THREE YEAR GUARANTEE. USE ONE AAA BATTERY (NOT INCLUDED).
|
|
|
|
Project Supplies - Clock Components
|
QUARTZ CLOCK MOVEMENTS WITH OR WITHOUT PENDULUMS
|
| Westminster Quartz Movmt
...plus other(s)
|
THESE QUARTZ CLOCK MOVEMENTS WILL PROVIDE YEARS OF ACCURATE SERVICE IN JUST ABOUT ANY TIMEPIECE PROJECT (HANDS NOT INCLUDED):
937-565 - COMPACT QUARTZ MOVEMENT, WITH NO PEDULUM, CHIMES EVERY 15 MINUTES PLAYING PART OF THE WESTMINSTER MELODY; COMPLETE TUNE AND HOUR COUNT ON THE HOUR: 7/16" DIAMETER SHAFT; FITS DIALS UP TO 3/8" THICK. OPERATES ON ONE C CELL BATTERY (NOT INCLUDED).
937-586 - STANDARD QUARTZ PENDULUM MODEL FEATURES BREAKAWAY PENDULUM ROD TO SUIT VARIOUS LENGTHS UP TO 16", IN 1" INCREMENTS: 7/16" DIAMETER SHAFT; FITS DIALS UP TO 3/8" THICK. OPERATES ON ONE C CELL BATTERY (NOT INCLUDED).
TO HELP COMPLETER YOUR PROJECT, MAY WE SUGGEST
858-390 - HANDS FOR CLOCK MOVEMENTS.
|
|
|
|
Project Supplies - Clock Components
|
QUARTZ ALARM CLOCK FITUPS
|
| 2 3/8" Quartz Alarm
...plus other(s)
|
ALL QUARTZ ALARM CLOCK FITUPS FEATURE SECOND SWEEP HANDS AND SNOOZE BUTTONS FOR FIVE MINUTES' EXTRA SLEEP. FOR ACCESS TO REAR MOUNTED CONTROLS, BACK OF CLOCK DESIGN MUST BE LEFT OPEN:
937-572 - MINI ALARM HAS 1-7/8" ARABIC NUMERAL FACE; PRESS FITS INTO 1-3/4" MOUNTING HOLE (INCLUDES LR44 BUTTON TYPE BATTERY). 936-323 - ROMAN NUMERAL FACE, 2-11/32" DIA. ALARM PRESS FITS INTO 2-3/8" MOUNTING HOLE OR RING MOUNTS (RING AND SCREWS INCLUDED) INTO 2-3/4" HOLE. REQUIRES AA BATTERY (NOT INCLUDED). 936-323 - 3" DIA. ALARM, WITH ARABIC NUMERAL FACE, PRESS FITS INTO 3-1/16" MOUNTING HOLE OR RING MOUNTS (RING AND SCREWS INCLUDED) INTO 3-9/16" HOLE. REQUIRES AA BATTERY (NOT INCLUDED).
|
|
|
|
Project Supplies - Clock Components
|
3-1/4" OVAL CLOCK FITUPS
|
| Oval Fitup White Arabic Dial
...plus other(s)
|
THESE ATTRACTIVE OVAL CLOCK FITUPS HAVE FACES THAT PROVIDE INTERESTING DETAIL, HOWEVER, THEY DO FIT INTO A 3/4" DEEP, ROUND HOLE (2-3/8" DIA.):
WHITE FACE WITH ARABIC OR ROMAN NUMERALS; BLACK HOUR, MINUTE AND SECOND HANDS (BATTERY NOT INCLUDED).
|
|
|
|
Project Supplies - Clock Components
|
CLASSIC AND SCHOOLHOUSE CLOCK DIAL FACES
|
| Schoolhouse Dial
...plus other(s)
|
THESE CLASSIC AND SCHOOLHOUSE DIAL FACES WILL ADD A TOUCH OF AUTHENTICITY TO YOUR CLOCK PROJECTS:
937-894 - SCHOOLHOUSE FACE IS 10" X 10" WITH AN 8-1/2" TIME RING. 937-901 - CLASSIC FACE IS 10" X 10" WITH AN 8" TIME RING. BOTH ARE HEAVY PAPER STOCK. CLOCK SHOWN WITH SCHOOLHOUSE FACE.
|
|
|
|
Project Supplies - Clock Components
|
CLOCK HARDWARE ACCENTS YOUR CLOCK CASES
|
| Eli Clock Finial
...plus other(s)
|
ELEGANT DETAILS SHOW THE EXTRA EFFORT THAT WENT INTO ANY PROJECT, ESPECIALLY A CLOCK. TAKING THE TIME TO ADD CLOCK HARDWARE ACCENTS ADDS WARMTH, CHARM AND VALUE:
CLOCK FINIALS ARE AUTHENTIC COPIES OF PERIOD ORIGINALS. BRASS BALLS AND URNS ARE SPUN, JUST AS THE OLD ONES WERE. TO COMPLETE YOUR CLOCK PROJECT, CONSIDER SPECIALTY HINGES AND KEYHOLE ESCUTCHEONS. BRIGHT POLISHED BRASS.
941-301 - CLOCK HINGES (11/16" X 1-5/8"). 941-308 - CLOCK KNOB WITH BACKPLATE (1/2" X 1-1/2"). 941-315 - KEYHOLE ESCUTCHEON TO MATCH 941-308 (1/2" X 1-1/2"). 941-322 - ELI TERRY CLOCK FINIAL (1-1/2" X 3-1/2" TALL). 941-329 - CLOCK FINIAL (1-3/8" BALL X 3-5/8" TALL). 941-336 - CLOCK FINIAL (1-3/8" BALL X 3-1/2" TALL). 941-246 - MINIATURE FINIAL (5/8" BALL X 15/16" TALL).
|
|
|
|
Project Supplies - Clock Components
|
CLASSIC AND DECO STYLE CLOCK FITUPS FEATURE A VARIETY OF FACES
|
| 65mm Sq White Roman
...plus other(s)
|
ADD A TOUCH OF THE OLD TO THE NEW WITH CLASSIC AND DECO STYLE CLOCK FITUPS THAT COME WITH ROMAN OR ARABIC, WHITE OR IVORY AND SQUARE OR OVAL FACES:
50MM AND 60MM DIA. FITUPS INCLUDE ALL METAL CONSTRUCTION, MINERAL GLASS LENSES, BATTERIES AND FIT INTO 1-3/8" DIA. HOLES, USING SOFT GASKET MOUNTING. 65MM DIA. FITUPS HAVE METAL BEZELS, OPERATE ON "N" BATTERIES (NOT INCLUDED) AND FIT INTO 2-3/8" DIA. HOLES. 953-852 - 50MM SQUARE WHITE FACE ROMAN NUMERAL AND 953-859 - 50MM SQUARE MODERN IVORY FACE ARABIC NUMERAL, NOT SHOWN.
953-838 AND 953-845 ARE LIMITED TO QUANTITIES ON HAND.
|
|
|
|
Project Supplies - Jewelry Box Hdwr & Access
|
BRASS FEET FROM BRUSSO® ACCENT ALL BOX PROJECTS
|
| Template For Box Feet Hd702
...plus other(s)
|
| | |
Please Wait......Searching....
to see Sub Categories)